Samsung CL-29Z50MQ User Manual (user Manual) (ver.1.0) (English) - Page 7

Sound Mode / Custom / MTS / Auto Volume / Turbo Sound / Pseudo Stereo  Mode: Standard/Music/ Sound Movie/Speech/Custom Mode : Custom ► You can select the type of Custom ► special sound effect to be MTS : Stereo ► used when watching a given broadcast. Auto Volume : Off ► ▼ More ➢ Press the S.MODE Move Enter Return button on the remote control to select one of the standard sound settings.  Custom: Bass/Treble/Balance The TV has several settings which allow you to control the sound quality. ➢ If you make any changes to these settings, the sound mode is automatically switched to "Custom".  MTS (Multi-channel Television Sound) Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP. ➢ Press the MTS button on the remote control repeatedly to select "Stereo", "Mono", or "SAP" (Secondary Audio Program).  Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.  Turbo Sound This feature emphasizes the bass and treble frequencies to add fullness to the sound. ➢ Press the TURBO button on the remote control repeatedly to select "Off", "Plus" or "Voice".  Pseudo Stereo This feature converts a monaural sound signal into two identical left and right channels. Once the "Pseudo Stereo" is set to "On" or "Off", the setting applies to the sound effects such as "Standard", "Music", "Movie" and "Speech". Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Poor picture.  Try another channel.  Adjust the antenna.  Check all wire connections. Poor sound quality.  Try another channel.  Adjust the antenna. No picture or sound.  Try another channel.  Press the SOURCE button.  Make sure the TV is plugged in.  Check the antenna connections.  Make sure the MUTE button is off. No color, wrong colors or tints.  Make sure the program is broadcast in color.  Adjust the picture settings. Picture rolls vertically.  Adjust the antenna.  Check all wire connections.  If you are using a VCR, check the tracking. The TV operates erratically.  Unplug the TV for 30 seconds, then try operating it again. Your remote control does not operate your TV.  Make sure the remote has batteries.  Check that the "+" and "-" ends of the batteries are inserted correctly.  Check that the batteries are drained. continued... English - 7 The TV won't turn on.  Make sure the wall outlet is working.  Make sure the TV is plugged in.  Make sure the remote has batteries. Remote control malfunctions  Replace the remote control batteries.  Clean the upper edge of the remote control (transmission window).  Check that the "+" and "-" ends of the batteries are inserted correctly.  Check that the batteries are drained.