Samsung CLP-310N Service Manual - Page 50
ITB, 4.3 Fuser
View all Samsung CLP-310N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Disassembly and Reassembly 3.4.2 ITB 1. Unplug the one connector from OPE PBA and pull out the ITB unit in the direction of bottom. 3.4.3 Fuser 1. Remove the Right cover. And remove the 2 connector as shown below. 2. Remove the 4 screw, and move the shaft as shown below. And remove the Fuser unit. Caution-The fuser is very hot. So turn the printer off and wait until the printer to cool before replacing it. Service Manual 3-9 Samsung Electronics
Disassembly and Reassembly
Service Manual
3-9
Samsung Electronics
3.4.2 ITB
3.4.3 Fuser
1.
Unplug the one connector from OPE PBA and
pull out
the ITB unit in the direction of bottom.
1.
Remove the Right cover. And remove the 2
connector as shown below.
2.
Remove the 4 screw, and move the shaft as
shown below. And remove the Fuser unit.
Caution
Caution-The fuser is very hot. So turn the
printer off and wait until the printer
to cool before replacing it.