Samsung CLX-3170 User Manual (ENGLISH) - Page 185
Removing Printer Software, Installing mono printer driver, Select a Printer Port
View all Samsung CLX-3170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Removing Printer Software 1 Start Windows. 2 From the Start menu select Programs or All Programs → your printer driver name → Maintenance. 3 Select Remove and click Next. You will see a component list so that you can remove any item individually. 4 Select the components you want to remove and then click Next. 5 When your computer asks you to confirm your selection, click Yes. The selected driver and all of its components are removed from your computer. 6 After the software is removed, click Finish. Installing mono printer driver This printer provides you the printer drivers with a mono driver so you can use your printer as a monochrome printer. You must install the mono driver on your computer. Following steps guide you through the step by step installation process. 1 Make sure that the printer is connected to your computer and powered on. Or your computer and printer are connected to the network. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. 3 Click Cancel. 7 Select Local printer attached to this computer, and Automatically detect and install my Plug and Play printer, then click Next. Go to step 13. If your computer does not find the printer, then follow the next step. 8 Select Next in the Select a Printer Port window. 9 In the Select a Printer Port window, select Have Disk.... 10 Click Browse to find a mono driver for your printer. 11 Select ***.inf file and click Open. 12 Click OK in the Install From Disk window. 13 Select a mono driver in the Printers field, and click Next. NOTE: If you have installed a mono driver before, then the Use Existing Driver window. Select as the window explains, and click Next. Also, depending on your computer configuration, the printer sharing window or the print the test page window may appear; make the appropriate selection. 14 Enter your printer name, and click Next. 15 Click Finish to start installing a mono printer driver. NOTE: If your printer is connected to a network, go to printer's Properties and select the Ports tab, then click Add Portand Standard TCP/IP Port, and create a new port to connect to the printer. To create a new port, follow the procedure laid out in the wizard window. If the confirmation window appears, click Finish. 4 Click Start → Printers and Faxes. 5 Select Add Printer. 6 When Add Printer Wizard appears, click Next. 11 Installing Printer Software in Windows