Samsung CLX-3175N User Guide - Page 74
In the paper exit area, fuser lever
View all Samsung CLX-3175N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
2. Open the inner cover. In the paper exit area 1. Open and close the front cover. The jammed paper is automatically ejected from the machine. 2. Gently pull the paper out of the output tray. 3. Carefully take the jammed paper out of the machine. If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step. 3. Open the rear cover. 4. If you see the jammed paper, pull it straight up. Skip to step 8. Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser's operating temperature is 180°C (356°F). Take care when removing paper from the machine. 4. Close the inner cover. 5. Lowering down the scan unit gently and slowly until it is completely closed. Make sure that it is securely latched. Be careful not to pinch your fingers! If you still do not see the paper, go to the next step. 5. Pull up the fuser lever. If the scan unit is not completely closed, the machine will not operate. 74 _Troubleshooting 1 fuser lever