Samsung DIGIMAX-A302 User Manual - Page 95

Starting PC mode

Get Samsung DIGIMAX-A302 PDF manuals and user guides View all Samsung DIGIMAX-A302 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Starting PC mode • If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". • In this mode, you can download stored images to your PC through the USB cable. • The LCD monitor is always turned off in PC mode. • The camera status lamp will blink when the files are transferring via the USB connection. ■ Connecting the camera to a PC 1. Turn the PC power on. 2. Turn the camera power on. 3. In any mode other than Voice Recording mode, press the MENU button. 4. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 5. Select the [USB] menu by pressing the UP/ DOWN ◀ ▶ 2048 SETUP BEEP FREQUENCY USB BACK:◀ COMPUTER PRINTER SET:OK button and press the RIGHT button. 6. Use the UP and DOWN buttons to select [COMPUTER], and then press the OK button. 7. Press the menu button twice and the menu will disappear. 8. Connect the PC and the camera via the USB cable. - Insert the small plug of the USB cable into the camera USB connection terminal. - Insert the large connector of the USB cable into the USB port of the PC. - The plugs must be firmly inserted. ※ If you selected [PRINTER] in Step 6, when you connect the camera to your printer, the [CONNECTING...] message will be displayed on the LCD monitor and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 3 and onward. ■ Disconnecting the camera and PC : Refer to page 98(Removing the removable disk). INFORMATION ● The camera driver must be installed before using PC mode. 《95》

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
《95》
Starting PC mode
•
If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to "computer connection mode".
•
In this mode, you can download stored images to your PC through the USB cable.
•
The LCD monitor is always turned off in PC mode.
•
The camera status lamp will blink when the files are transferring via the USB connection.
■
Connecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3. In any mode other than Voice Recording mode, press
the MENU button.
4. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
5. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
6. Use the UP and DOWN buttons to select [COMPUTER], and then press the OK button.
7. Press the menu button twice and the menu will disappear.
8. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB port of the PC.
- The plugs must be firmly inserted.
■
Disconnecting the camera and PC : Refer to page 98(Removing the removable disk).
※
If you selected [PRINTER] in Step 6, when
you connect the camera to your printer, the
[CONNECTING…] message will be
displayed on the LCD monitor and the
connection will not be established.
In this case, disconnect the USB cable, and
then follow the procedure from Step 3 and
onward.
●
The camera driver must be installed before using PC mode.
INFORMATION
◀
▶
SETUP
BEEP
FREQUENCY
USB
COMPUTER
PRINTER
BACK:
◀
SET:OK