Samsung DMT300RFB User Manual (user Manual) (ver.1.0) (English) - Page 23
troubleshooting, Has water remaining - problems
UPC - 036725578340
View all Samsung DMT300RFB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
05 troubleshooting troubleshooting Check these points if your dishwasher... PROBLEM POSSIBLE CAUSE SOLUTION The door is not closed completely. Check that the door is latched and closed completely. No cycle is selected. Select a cycle. Will not start. The power cable is not connected. Connect the power cable properly. The water supply does not work. Check that the water supply valve is open. A circuit breaker is opened. Reset the circuit breaker. It's taking too long with an operation or cycle. Only cold water is being supplied. Check that the water supply line is connected to a hot water supply. (Additional time is required to heat cold water.) There is water left over from the last cycle. Insert detergent without loading dishes, and run the Normal cycle to clean the dishwasher. Has a bad odor. Drain hose is obstructed. Contact a qualified service technician to remove any obstruction from the drain hose. The dishwasher is not being used daily or soiled dishes have been left in the unit too long. With the dishwasher empty and no detergent, place a glass with 8 ounces of vinegar upright into the lower rack, and then run a Normal cycle. Has water remaining after the cycle has finished. The drain hose is folded or clogged. Straighten the hose. An inappropriate cycle was selected. Select a cycle according to the number and soil level of the dishes, as directed in this manual. The water temperature was low. Connect the water supply line to a hot water supply. There are food particles remaining on dishes. Dishwasher detergent was not used. Low water pressure. Use a automatic dishwasher detergent. The water pressure should be between 20 and 120 psi (140 ~ 830 kPa). A nozzle is clogged. Clean the nozzle. The dishes were loaded improperly. Rearrange the dishes so they do not interfere with the nozzle rotation and the detergent dispenser operation. Does not dry dishes well. There is no rinse aid in the dispenser. The temperature of the water is low when the dishwasher is running. Check the dispenser and add rinse aid. Use rinse aid with the Sanitize option. troubleshooting _23