Samsung DV338AGB User Manual (user Manual) (ver.1.0) (English) - Page 29

after Refresh.

Get Samsung DV338AGB PDF manuals and user guides View all Samsung DV338AGB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

05 troubleshooting Dries unevenly. • Seams, pockets, and other similarly heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. Select the Very Dry setting if desired. • If one heavy item is dried with a lightweight load, such as one towel with sheets, it is possible that the heavy item will not be completely dry when the rest of the load has reached the selected dryness level. Sort heavy items from lightweight items for best drying results. Has an odor. • Household odors from painting, varnishing, strong cleaners, etc. may enter the dryer with the surrounding room air. This is normal as the dryer draws the air from the room, heats it, pulls it through the tumbler, and exhausts it outside. • When these odors linger in the air, ventilate the room completely before using the dryer. Shuts off before load is dry • Dryer load is too small. Add more items or a few towels and restart the cycle. • Dryer load is too large. Remove some items and restart the dryer. Lint on clothes • Make sure the lint filter is cleaned before every load. With some loads that produce high amounts of lint, it may be necessary to clean the filter during the cycle. • Some fabrics are lint producers(for example, a fuzzy white cotton towel)and they should be dried separately from clothes that are lint trappers(i.e.,a pair of black linen pants) • Divide larger loads into smaller loads for drying • Check pockets thoroughly before washing and drying clothes. Garments still wrinkled after • Small loads of 1 to 4 items work best. Wrinkle-Care • Load fewer garments.Load similar-type garments. Odors remain in clothing after Refresh. • Fabrics containing strong odors should be washed in a normal cycle. Water drips from nozzle when Steam-Care starts. • This is steam condensation. The dripping water will stop after a short time. Spryed water is not visible • Sprayed water is difficult to see when the door is closed during Steam-Care DV338AER-02571A_EN.indd 29 troubleshooting _29 2008-02-14 ¿ÀÈÄ 4:23:49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
troubleshooting
_29
Dries unevenly.
•
Seams, pockets, and other similarly heavy areas may not be
completely dry when the rest of the load has reached the selected
dryness level. This is normal. Select the Very Dry setting if desired.
•
If one heavy item is dried with a lightweight load, such as one towel
with sheets, it is possible that the heavy item will not be completely
dry when the rest of the load has reached the selected dryness level.
Sort heavy items from lightweight items for best drying results.
Has an odor.
•
Household odors from painting, varnishing, strong cleaners, etc.
may enter the dryer with the surrounding room air. This is normal as
the dryer draws the air from the room, heats it, pulls it through the
tumbler, and exhausts it outside.
•
When these odors linger in the air, ventilate the room completely
before using the dryer.
Shuts off before load is dry
•
Dryer load is too small. Add more items or a few towels and restart
the cycle.
•
Dryer load is too large. Remove some items and restart the dryer.
Lint on clothes
•
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
•
Some fabrics are lint producers(for example, a fuzzy white cotton
towel)and they should be dried separately from clothes that are lint
trappers(i.e.,a pair of black linen pants)
•
Divide larger loads into smaller loads for drying
•
Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled after
Wrinkle-Care
•
Small loads of 1 to 4 items work best.
•
Load fewer garments.Load similar-type garments.
Odors remain in clothing
after Refresh.
•
Fabrics containing strong odors should be washed in a normal cycle.
Water drips from nozzle
when Steam-Care starts.
•
This is steam condensation. The dripping water will stop after a short
time.
Spryed water is not visible
during Steam-Care
•
Sprayed water is difficult to see when the door is closed
05 troubleshooting
DV338AER-02571A_EN.indd
29
2008-02-14
¿ÀÈÄ 4:23:49