Samsung DV45H6300EG/A3 Trouble Shooting Guide Tech Manual (English, French, Sp - Page 2
Alignment And Adjustments - lowes
View all Samsung DV45H6300EG/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. ERROR ITEMS AND DIAGNOSTIC CODES An occurrence of an Error will make a sound of error melody for 5sec and continuously show one of the Error Displays from the following errors. Error Display Trigger tE The Thermistor resistance is very low or high. dE Running the dryer with door open dF Invalid Door Switch bE2 Invalid state of key. FE Invalid power source Frequency 9E1 Electronic Control Problem (Over Voltage Error) Action Taken Check for: - Clogged lint screen. - Restricted vent system. - Check Thermistor resistance. Check for: - Close the door, and run the dryer. - Loose or open wire terminals in Door Sense circuit. Check for: - Loose or open wire terminals in Door Sense circuit. Check for: - Display PCB key circuit short or not. Check for: - Not using regular power source frequency - Invalid power frequency sense circuit Check for: - Check PCB and Wire harness. - Check Power supply. AE Electronic Control Problem (Communication Error) Check for: - Check PCB and Wire harness. - Replace PCB. EEE Invalid state of Eeprom communication Check for : - PCB with Eeprom circuit. HE Invalid heating Temp in running the dryer Call customer service 2 Technical_information-03382A_EN_131209.indd 2 2013-12-09 �� 5:37:30