Samsung DVD-P701/XAA User Manual (user Manual) (ver.1.0) (English) - Page 33

Setting Up the Audio Options

Get Samsung DVD-P701/XAA PDF manuals and user guides View all Samsung DVD-P701/XAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Setting Up the Audio Options 1 With the unit in Stop mode, press the SETUP button. 2 Use the UP/DOWN buttons to select AUDIO OPTIONS. Then press the ENTER button. 3 Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT button. Digital Output 1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output. NOTE : Be sure to select the correct Digital Output or no audio will be heard. DTS 1. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. 2. Off : Doesn't output digital signal. Dynamic Compression 1. On : To select dynamic compression. 2. Off : To select the standard range. 2X Scan Audio 1. On : Turns 2X audio on. 2. Off : Turns 2X audio off. Though 2X Scan Audio is ON in the SETUP MENU, no sound will be heard on discs which are recorded with LPCM, DTS or MPEG-2 Audio. NOTE • How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button. • Certain audio features of this product manufactured under a license from Desper Products, Inc. Spatializer® and circle-in-square device are trademarks owned by Desper Products, Inc. • Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights reserved. • "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. 33 CHANGING SETUP MENU

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
33
Setting Up the Audio Options
1
1
With the unit in Stop mode, press the SETUP button.
2
2
Use the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
3
3
Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT button.
Digital Output
1
. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2
. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
NOTE
: Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1
. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2
. Off : Doesn’t output digital signal.
Dynamic Compression
1
. On : To select dynamic compression.
2
. Off : To select the standard range.
2X Scan Audio
1
. On : Turns 2X audio on.
2
. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
NOTE
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer
®
and circle-in-square device are trademarks owned by Desper Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHANGING
SETUP MENU