Samsung DVD-S222 User Manual (user Manual) (ver.1.0) (English) - Page 44

Setting Up the Audio Options

Get Samsung DVD-S222 PDF manuals and user guides View all Samsung DVD-S222 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Setting Up the Audio Options 1 With the unit in Stop mode, press the SETUP button. 2 Use the UP/DOWN buttons to select AUDIO OPTIONS. Then press the ENTER button. 3 Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT buttons. Digital Output 1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital NOTE : Be sureAtoudseiolecOt uthtpeucto. rrect Digital Output or no audio will be heard. N DTS 1. Off : Doesn't output digital signal. 2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. Dynamic Compression 1. On : To select dynamic compression. 2. Off : To select the standard range. 2X Scan Audio 1. Off : Turns 2X audio off. Though 2X Scan Audio is ON in the SETUP MENU, no sound will be heard on discs which are recorded with LPCM, DTS or MPEG-2 Audio. 2. On : Turns 2X audio on. NOTE • How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button. • Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. • "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
44
Setting Up the Audio Options
1
1
With the unit in Stop mode, press the SETUP
button.
2
2
Use the UP/DOWN buttons to select AUDIO
OPTIONS. Then press the ENTER button.
3
3
Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Digital Output
1. PCM
: Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream
: Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N
NOTE
: Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1
. Off : Doesn’t output digital signal.
2
. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1
. On : To select dynamic compression.
2
. Off : To select the standard range.
2X Scan Audio
1
. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
2
. On : Turns 2X audio on.
NOTE
•
How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Manufactured under license from Dolby Laboratories.
”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.