Samsung DVD-V5500 User Manual (user Manual) (ver.1.0) (English) - Page 11

Rear Panel SETUP ❻ ❼ 1 AUDIO OUT Connect to the Audio input jacks of your television. 2 COMPONENT VIDEO OUT - Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video. - If Component (Progressive Scan) Video Output is selected in the Alt Video Out menu or by using the P.SCAN button on the front panel, progressive scan mode will be enabled. - If Component (Interlace Scan) Video Output is selected in the Alt Video Out menu or by using the P.SCAN button on the front panel, interlaced scan mode will be enabled. 3 LINE IN 1 (VIDEO/AUDIO) Connect to the Video/Audio output jack of your external device. ❽ 4 LINE OUT (VIDEO/AUDIO) Use a Video/Audio cables to connect to the Video/Audio input jacks on your television. 5 RF IN (FROM ANT.) Connect the RF Antenna cable to your DVDVCR 6 S-VIDEO OUT Use the S-Video cable to connect this jack to the S-Video input jack on your television for higher picture quality. 7 DIGITAL AUDIO OUT (COAXIAL) - Use a Coaxial digital cable to connect to a compatible Dolby Digital receiver. - Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. 8 RF OUT (TO TV) Connect your DVD-VCR to a TV Notes I Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system. I If Component (Progressive Scan) Output is selected in Alt Video Out menu, Video and S-Video, will not work. I See pages 59 ~ 60 to get more information on how to use the Alt Video Out menu. Front Panel Display ❶ ❷ ❹ ❸ 1 DVD is activated. 2 The time, counter position, time remaining or current deck status is indicated. 3 VCR is activated. 4 DVD or CD media is loaded. 5 VHS videotape is loaded. ❻ ENG-11