Samsung DVE22N6850X/A2 User Manual - Page 9
Before installation, Key installation requirements, Location considerations
View all Samsung DVE22N6850X/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Before installation Before installation Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. Key installation requirements • A grounded electrical outlet. • A power cord for electric dryers (except in Canada). • An exhaust system made of rigid metal or flexible stiff-walled metal exhaust ducting. WARNING Remove the door from all discarded appliances to prevent a child from suffocating. Location considerations • Adequate clearances between the dryer and adjacent walls or other surfaces. • Adequate air circulation for ventilation. • Away from water and weather. WARNING • Make sure to exhaust the dryer outdoors to reduce the risk of fire. • Keep the dryer area clear of combustible materials, gasoline, and other flammable vapors and liquids. • Do not install other fuel-burning appliances around or in the same place as the dryer. • Place the dryer at least 18 in. (460 mm) above the floor for garage installation. Alcove or closet installation Minimum Clearance for stable operation: Sides Top Rear Front 1 in. (25 mm) 1 in. (25 mm) 3 in. (76 mm) 1 in. (25 mm) The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² (465 cm²) with 3" (7.6 cm) minimum clearance on the top and bottom. A louvered door with equivalent space clearance is acceptable. DV6850N_DC68-03650D-07_EN.indd 9 English 9 2020-05-11 3:19:33