Samsung DVE45T3400W/A3 User Manual - Page 30
Clg Cg, Ducting, requirements, C80 C8, C90 C9, Connect the electrical wiring, Check code, Meaning
View all Samsung DVE45T3400W/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation Installation Check code Meaning Solution 0 Vent condition is good. Clg (Cg) C80 (C8) C90 (C9) The vent is clogged. About 80 % of the vent is clogged. (This may decrease the drying performance.) Over 90 % of the vent is clogged. (This may lead to poor drying performance or cause malfunction) 1. Clean the lint filter. 2. Check your vent condition. (Refer to the "Ducting requirements" section) * You must take measures (such as cleaning) through expert personnel. The internal temperature of the dryer is too low (below 32 °F (0 °C)) Leave the dryer at room Ct or too high (over 104 °F (40 °C)) and temperature (41~95 °F (5~35 °C)) therefore vent blockage cannot be for an hour and check again. detected. tC Temperature sensor error Contact a service center. Remove items from the drum and Unit is detecting items inside the check again. C1 drum or there is an error on the dry sensor. If the problem continues, contact a service center. Close the door properly and check again. dC Unit is detecting door is open If the problem continues, contact a service center. 9C1 Abnormal voltage detected Check the power connection. (Refer to the "Connect the electrical wiring" section) If the problem continues, contact a service center. 30 English DV3400T_DC68-03784M-00_EN.indd 30 2020-06-11 10:01:22