Samsung DW7933LRASR Installation Guide Ver.1.0 (English, French, Spanish) - Page 10
Check The Electrical Requirements And Cautions - ac
View all Samsung DW7933LRASR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
installing the dishwasher STEP 4 CHECK THE ELECTRICAL REQUIREMENTS AND CAUTIONS The electrical requirements for the dishwasher are as follows: • In the United States, install in accordance with the National Electric Code/State and Municipal codes and/or local codes. • In Canada, install in accordance with the Canadian Electric Code C22.1-latest edition/Provincial and Municipal codes and/or local codes. • For cable direct connections. - Use flexible, armored or non-metallic sheathed, copper wire with a grounding wire that meets the wiring requirements for your local codes and ordinances. - Use the strain relief method provided with the wiring junction box or install a U.L.-listed/CSA-certified clamp connector to the wiring junction box. If using conduit, use a U.L.-listed/CSA-certified conduit connector. • For power cord connections - The power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet next to the dishwasher opening. The outlet must meet your local codes and ordinances. Use a U.L.listed/CSA-certified power cord kit. - The dishwasher must be connected to an electrical supply that provides the voltage and amperage marked on the rating plate of the unit: 15 amps, 120 volts, 60Hz AC. - Ensure that the circuit breaker connected to the dishwasher is off. - The power cable must not extend more than 4 ft (1.2 m) from the side of the dishwasher. - Check with a qualified electrician or serviceman if you are unsure whether the dishwasher is properly connected. - Do not connect another appliance to the same power outlet as the dishwasher. - Before connecting the power cable to the dishwasher, ensure that there are no electrical hazards (which may result in fire, explosion, electric shock, or personal injury). - The power cable must pass through the channel on the bottom of the dishwasher as shown in Figure 3. Power cable Hot Water Supply Line 5¹⁄3~7¹⁄3 in. (135 ~ 185mm) 10_ installing the dishwasher installation_DD68-00046A-06_EN_130401.indd Sec3:10 Dishwasher bottom 2013-04-01 5:05:22