Samsung DW7933LRASR User Manual Ver.1.0 (English, French, Spanish) - Page 9
Control Panel - heavy light
View all Samsung DW7933LRASR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Using your dishwasher CONTROL PANEL DW7933 Series 02 Using your dishwasher 1 3 4 6 52 7 8 PROGRESS 1 LIGHT 2 DISPLAY CYCLE 3 SELECTOR CANCEL & 4 DRAIN 5 SANITIZE CHILD LOCK/ 6 UNLOCK Progress information (Wash, Dry, Clean) Each progress light corresponding to the current operation turns on to show the progress of the cycle. Displays information (Low Rinse, Child Lock). The "Low Rinse" light turns on when you need to refill the rinse aid agent and the "Child Lock" light turns on/off when you activate the Child Lock/Unlock. Select the appropriate wash cycle depending on the soil level of your dishes. After you select a cycle, the Cycle On light for that cycle lights up. If you want to cancel the selected cycle, press the selected cycle button again. If an error occurs during an operation, an error message is illuminated with a warning sound. Refer to the "Information codes" on page 26. To cancel a cycle currently running and drain the dishwasher, hold down both the Heavy and Quick + buttons for three (3) seconds. When you use the Sanitize option, the temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high temperature sanitization. If you select the Sanitize option, the "Sanitize" lamp blinks when the water temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then remains illuminated until the Sanitize option ends. When you open the door or press the Power button, the "Sanitize" lamp turns off. The Sanitize feature is in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Your dishwasher is NSF Certified. The cycle that is NSF certified is the Heavy Cycle with the sanitize option selected. This option allows you to lock the buttons on the control panel so children cannot accidently start the dishwasher by pressing the buttons on the panel. To lock and unlock the buttons on the control panel, hold the Sanitize button down for three (3) seconds. - When Power is On : Hold down the Sanitize button for three (3) seconds. - When Power is Off : Push the Power button first, and then hold down the Sanitize button for three (3) seconds. DW7933LRASR-00141A-02_EN.indd 9 Using your dishwasher _9 2012-09-05 12:09:05