Samsung DW80B6061UG/AA User Manual - Page 49

Storm Wash+ area. See

Page 49 highlights

Problem There are food particles remaining on dishes. (Not cleaning properly.) Leaves glasses with a light film. Leaves a yellow or brown film on the inside of the dishwasher. Possible cause Solution There is no rinse aid. • Check the dispenser and add rinse aid. • Use liquid type rinse aid. A nozzle is clogged. • Clean the nozzle. See page 42. The dishes are improperly loaded. Too many dishes have been loaded. • Rearrange the dishes so they do not interfere with nozzle rotation and detergent dispenser operation. • Load only an appropriate number of dishes. • Load your dishes as recommended. (See page 18.) • Load the heavily soiled items into the Storm Wash+ area. (See page 19) • Scrape food from dishes prior to The filters are clogged or loading. (Do not pre-rinse.) not correctly fastened. • Clean the filter. (See page 43.) (Food soils remain on the filter.) • Make sure the filters are correctly fastened. Less water than required is supplied. • Check if the supplied water pressure is between 20 and 120 psi (between 140 and 830 kPa). The water supplied is soft and too much detergent • was used. Underload the dishwasher and use a rinse aid to minimize this. Aluminum dishes were included in the wash load. • Remove the marks on the dishes using a low sensitivity cleaner. This is caused by coffee and tea soils. • Remove the soils using a spot cleaner. • Use a cycle with a higher temperature. Troubleshooting DW7000B_DW80B7070_AA_DD68-00243A-01_EN_FULL.indd 49 English 49 2023-04-26 12:24:25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

English
49
Troubleshooting
Problem
Possible cause
Solution
There are
food particles
remaining on
dishes.
(Not cleaning
properly.)
There is no rinse aid.
Check the dispenser and add rinse
aid.
Use liquid type rinse aid.
A nozzle is clogged.
Clean the nozzle. See page
42
.
The dishes are
improperly loaded.
Too many dishes have
been loaded.
Rearrange the dishes so they do not
interfere with nozzle rotation and
detergent dispenser operation.
Load only an appropriate number of
dishes.
Load your dishes as recommended.
(See page
18
.)
Load the heavily soiled items into the
Storm Wash+ area. (See page
19
)
The filters are clogged or
not correctly fastened.
(Food soils remain on the
filter.)
Scrape food from dishes prior to
loading. (Do not pre-rinse.)
Clean the filter. (See page
43
.)
Make sure the filters are correctly
fastened.
Less water than required
is supplied.
Check if the supplied water pressure
is between 20 and 120 psi (between
140 and 830 kPa).
Leaves glasses
with a light film.
The water supplied is soft
and too much detergent
was used.
Underload the dishwasher and use a
rinse aid to minimize this.
Aluminum dishes were
included in the wash
load.
Remove the marks on the dishes
using a low sensitivity cleaner.
Leaves a yellow
or brown film on
the inside of the
dishwasher.
This is caused by coffee
and tea soils.
Remove the soils using a spot cleaner.
Use a cycle with a higher
temperature.
DW7000B_DW80B7070_AA_DD68-00243A-01_EN_FULL.indd
49
2023-04-26
°° 12:24:25