Samsung DW80F600UT User Manual - Page 14

Placing The Dishwasher And Connecting The Hot, Water Supply Line

Get Samsung DW80F600UT PDF manuals and user guides View all Samsung DW80F600UT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

installing the dishwasher STEP 7 PLACING THE DISHWASHER AND CONNECTING THE HOT WATER SUPPLY LINE 1. Adjust the three leveling legs at the bottom of the dishwasher after measuring the height of the cabinet opening from under the countertop to the floor. (See Step 8, Leveling the Dishwasher.) 2. Locate the hot water supply line and the power cable. 3. Place the dishwasher so that the power cable is in the right channel of the base of the dishwasher. Use standard duct tape or cable ties to secure the electrical cable to their adjacent channels in the base. This can prevent the electrical cable from being squeezed when you push the dishwasher into place. 4. Pull the drain hose through the hole in the sink cabinet side wall. Keep it free of kinks. 5. Make sure the hot water supply line is not twisted, and then connect the hot water supply line to the elbow joint. 6. Slide the dishwasher carefully into the installation space. If possible, gently pull any excess lengths of water supply line, drain hose, or power cable back as you move the dishwasher. Get a second or third person to help you do this if necessary. Do not place the dishwasher on the water supply line, drain hose, or power cable. CAUTION Also, make sure they are not folded or twisted. Drain hose Hot Water Supply Line CAUTION Do not overtighten the 90˚ Fitting. (Below 280 lb·in (31.6 N·m)) Doing so may damage the water inlet valve and cause a water leak. 14_ installing the dishwasher installation_DD81-01864B-04N_E_N16_01361043.1in4d.indddSecS3e:c134:14 20167-038-1243 3:59:21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
14_
installing the dishwasher
installation_DD81-01864B-04N_160314.indd
Sec3:14
installation_DD81-01864B-04_EN_160314.indd
Sec3:14
2016-03-14 3:59:21
201
-0
-
3:59:21
STEP 7
PLACING THE DISHWASHER AND CONNECTING THE HOT
WATER SUPPLY LINE
1.
Adjust the three leveling legs at the bottom of the dishwasher after measuring the height
of the cabinet opening from under the countertop to the floor. (See Step 8, Leveling the
Dishwasher.)
2.
Locate the hot water supply line and the power cable.
3.
4.
Pull the drain hose through the hole in the sink cabinet side wall. Keep it free of kinks.
5.
Make sure the hot water supply line is not twisted, and then connect the hot water supply
line to the elbow joint.
6.
Slide the dishwasher carefully into the installation space. If possible, gently pull any excess
lengths of water supply line, drain hose, or power cable back as you move the dishwasher.
Get a second or third person to help you do this if necessary.
Do not place the dishwasher on the water supply line, drain hose, or power cable.
Also, make sure they are not folded or twisted.
<Figure 6>
<Figure 7>
CAUTION
Do not overtighten the 90˚ Fitting.
(Below 280 lb·in (31.6 N·m))
Doing so may damage the water inlet
valve and cause a water leak.
Hot Water Supply Line
Hot Water Supply Line
Drain hose
Drain hose
installing the dishwasher
CAUTION
Place
the
dishwasher
so
that
the
power
cable
is
in
the
right
channel
of
the
base
of
the
dishwasher
.
Use
standard
duct
tape
or
cable
ties
to
secure
the
electrical
cable
to
their
adjacent
channels
in
the
base
.
This
can
prevent
the
electrical
cable
from
being
squeezed
when
you
push
the
dishwasher
into
place
.
7
8 23