Samsung DW80J3020U Installation Guide - Page 9

Check Water Supply Requirements And Cautions

Get Samsung DW80J3020U PDF manuals and user guides View all Samsung DW80J3020U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

02 INSTALLING THE DISHWASHER STEP 3 CHECK WATER SUPPLY REQUIREMENTS AND CAUTIONS • The hot water supply line pressure must be between 20~120 psi (140~830 kPa). • Adjust the water heater to deliver water between 120 ˚F (49 ˚C) ~ 149 ˚F (65 ˚C). - The dishwasher must be connected to a hot water supply between 120 ˚F (49 ˚C) ~ 149 ˚F (65 ˚C). This temperature range provides the best washing result and shortest cycle time. Temperature should not exceed 149 ˚F (65 ˚C) to prevent damage to dishes. - Ensure that the water supply valve is turned off before connecting the hot water supply line to the dishwasher. - Seal the hot water supply line connections using teflon tape or sealing compound to stop any water leakage. - The drain hose connected to the dishwasher must be run through the hole in the side wall so it can be connected to the drain outlet of the sink. When you install the dishwasher, ensure there is nothing on the drain hose and be careful not to tear it during the installation process. installation_DD81-01864B-04_EN_160314.indd Sec3:9 installing the dishwasher _9 20167-038-1243 3:59:20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
installing the dishwasher
_9
02 INSTALLING THE DISHWASHER
installation_DD81-01864B-0
EN_160314.indd Sec3:9
installation_DD81-01864B-04_EN_160314.indd
Sec3:9
2016-03-14 3:59:20
201
-0
-
3:59:20
STEP 3
CHECK WATER SUPPLY REQUIREMENTS AND CAUTIONS
•
The hot water supply line pressure must be between 20~120 psi (140~830 kPa).
•
Adjust the water heater to deliver water between 120 ˚F (49 ˚C) ~ 149 ˚F (65 ˚C).
-
The dishwasher must be connected to a hot water supply between 120 ˚F (49 ˚C) ~ 149 ˚F
(65 ˚C). This temperature range provides the best washing result and shortest cycle time.
Temperature should not exceed 149 ˚F (65 ˚C) to prevent damage to dishes.
-
Ensure that the water supply valve is turned off
before connecting the hot water supply line to
the dishwasher.
-
Seal the hot water supply line connections using teflon tape or sealing compound to stop any
water leakage.
-
The drain hose connected to the dishwasher must be run through the hole in the side wall so
it can be connected to the drain outlet of the sink. When you install the dishwasher, ensure
there is nothing on the drain hose and be careful not to tear it during the installation process.
<Figure 2>
7
8 23