Samsung DW80J9945US User Manual - Page 31

06 troubleshooting INFORMATION CODES The Control Panel displays information codes to help you understand what is occurring with your dishwasher. Code Action Over-level water check OC • Functional check. Close the water supply valve and go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact an authorized Samsung service centre. Leakage check • If a water supply valve connection leak occurs, close the water supply valve LC and go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact the installer to fix. If the problem continues, contact an authorized Samsung service centre. Water supply check • Check if the water supply valve is closed, the water supply is suspended, or the 4C water inlet valve or line is frozen or clogged by foreign particles. If the problem continues, close the water supply valve, and then contact an authorized Samsung service centre. Drain check 5C • After closing the water supply valve, check whether the drain hose is clogged or folded. Also, check whether drain hole inside sump is clogged. If the problem continues, contact an authorized Samsung service centre. High temperature heating check • Functional check. With the dishwasher empty, add detergent, and then run a HC cycle. If the problem continues, go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact an authorized Samsung service centre. Pump operation check 3C • Functional check. Turn off the dishwasher and try to start it again. If the problem continues, contact an authorized Samsung service center. For any codes not listed above, call 1-800-SAMSUNG (726-7864) DW80H994_DD68-00164A-03_EN_150408.indd Sec7:31 English - 31 2015-04-08 7:44:26