Samsung DW80R9950UG/AA User Manual - Page 10
Depending on where your electrical outlet is, you may need to cut a hole in the opposite
View all Samsung DW80R9950UG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation If this is a new installation, follow these steps: 1. Using a 21/2 inch hole saw, cut a hole into the side of the cabinet that holds the sink as shown in Figure 1-1 below. 2. If the base inside the sink cabinet is raised above the kitchen floor and is higher than the connections on the dishwasher, make a hole in the base inside the cabinet and in the cabinet side as shown in Figure 1-2. NOTE Depending on where your electrical outlet is, you may need to cut a hole in the opposite cabinet side. Figure 1-1 Figure 1-2 Installation The hole for the water supply line, drain hose and power cables. CAUTION Make sure the cabinet hole is smoothened before you insert the drain hose through the hole. A sharp edge of the cabinet hole may cause damage to the drain hose, resulting in a leak of the hose. 10 English DW9900R_DD68-00208A-00_EN.indd 10 12/29/2018 1:57:15 PM