Samsung DW80R9950US/AA User Manual - Page 28
Do not cut the wrinkled area of the drain hose to fit the size. When arranging the drain, hose
View all Samsung DW80R9950US/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installation 4. Slide a hose clamp over the end of the drain hose. Attach the drain hose to the sink connector, slide the hose clamp to the end of the hose, and then tighten the hose clamp. NOTE You must use a hose clamp. Failure to do so may cause water leakage. 5. To prevent backflow, secure the drain hose to the side or back wall of the kitchen cabinet using cable ties or other fixtures. Make sure the drain hose height is at least 20 inches from the floor. (See Figure 10.) 6. When drilling a hole for the drain hose on the cabinet wall, take caution not to damage the drain hose by sharp edges of the hole. On wooden walls, use sand paper to soften the edges. On metal walls, use insulation tape or duct tape to cover the sharp edges around the hole. 7. Take caution not the damage the drain hose when installing the dishwasher on the floor, wall, or cabinet. NOTE To prevent leaks or drainage problems, make sure the drain hose is not damaged, kinked, or twisted. 8. Do not cut the wrinkled area of the drain hose to fit the size. When arranging the drain hose, take caution not to contact on sharp edges of the cabinet or under-sink. CAUTION • Be careful when cutting off the end of the drain hose as there is a risk of injury. Clean around the sink's drain connection so that it does not damage the hose. Check for any foreign items in the drain hose and remove them. • When arranging the drain hose, make sure the drain hose is not cut, torn, or broken by any sharp edges of the floor, the product itself, or the cabinet. A damaged drain hose causes a leak. • Make sure to unplug the food disposal. Installation 28 English DW9900R_DD68-00208A-00_EN.indd 28 12/29/2018 1:57:20 PM