Samsung HG40NC678DF User Manual Ver.1.0 (English) - Page 32

¦¦ USB Software Upgrade Method Samsung may offer upgrades to the TV's SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you clone the hotel settings so that you can easily reset them after the upgrade. To upgrade the TV's software, follow these steps: 1. Insert a USB drive containing the SW upgrade into the USB port on the side of the TV. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Support, and then press the ENTERE button. USB (5V 0.5A) / CLONING 3. Press the ▲ or ▼ button to select SW Upgrade, and then press the ENTERE button. The message "Scanning for USB. This may take more than 1min." is displayed. 4. The message "Upgrade version XXXX to version XXXX? The system will be reset after upgrade." is displayed. Press the ◄ or ► to select the OK, and then press the ENTERE button. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are complete. ¦¦ Sound Bar yy Samsung Sound-Bars and Hospitality TVs in 2014 -- Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's sound through the Sound-Bar. -- The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on. If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on. If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on. -- Models supporting the ARC function are listed below: yy Sound-Bars:  HW-E350/E450/E550 HW-F350/F355/FM35/F450/FM45/FM45C/F550/F551/FM55/FM55C/F750/F751 yy Setting the Sound-Bars to Hotel Mode. 1. Set the following Hotel menu options: -- Hotel option > External Device > Sound Bar Out = On. -- Hotel option > Power On > Power On Volume = User Defined. -- Hotel option > Power On > Power On Volume Num > Set greater than 0. -- Hotel option > Power On > Max Volume > Set greater than 0. 2. Connect an HDMI cable from the HDMI OUT jack on the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV. 3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode. Sound Bar Hotel mode functional characteristics: yy Power On/Off is synchronized with the TV yy HDMI_CEC defaults set to On yy Functions through the "HDMI OUT" port only yy Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes. yy Acquires adjustable Power On and Max Volume settings from the TV's Hotel option menu. The Sound-Bar's Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV's Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then the Sound Bar's Power On Volume=10 and Max Volume=45. 32 English [HC670_677_678-ZA]Install Guide-X0ENG.indd 32 2014-03-17 10:02:31