Samsung HG40NC693DF Installation Guide Ver.1.0 (English) - Page 27
more operating information.
View all Samsung HG40NC693DF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Category System Hotel TV Function Item Self Diagnosis for TV Self Diagnosis for HTV SW Update Service Pattern ATV Cable AGC Gain DTV Open Cable AGC Gain Sound Bar Out TV reset initial value ... ... ... OFF Default Default OFF Description • Enter Self Diagnosis Menu. Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen. • Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen. Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have any problems with the Pro:idiom encryption channel or the communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung Service. Lets you upgrade the TV SW with a USB memory stick. See Page 37. Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu button to turn off the test patterns and exit. Lets you control the AGC gain of the analog cable channels. Don't change the default value unless problems occur. Lets you control the AGC gain of the digital cable channels. Don't change the default value unless problems occur. If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the TV sound is outputted when the TV is turned on. • ON : When the TV is turned on, the TV sound is automatically outputted in the Sound Bar device only. • OFF : When the TV is turned on, the TV sound is automatically outputted in the TV speaker device only. See page 37. Returns all settings on the TV to their factory defaults. ✎✎REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel maping changes, REACH contents, and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for more operating information. 27 English