Samsung HG46NA590LB Installation Guide User Manual Ver.1.0 (English) - Page 1
Samsung HG46NA590LB Manual
View all Samsung HG46NA590LB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Setup Guide To register this product please visit www.samsung.com/register. BN68-04353A-01 List of Parts 1 2 3 STOP Please do not return this unit If you are having problems operating this TV, Please call; US : 1-866-894-0524 CANADA : 1-800-726-7864 For web support please visit http://www.samsung.com/us/business 4 5 6 1 Remote Control (AA59-00628A) & Batteries (AAA x 2) 3 Data Cable (BN39-00865B, BN39-01011C) 2 Power Cord 4 Hotel Mount Kit 5 • Owner's Instructions • Safety Guide 6 Security Screw x 4 5/32″ tamper resistant hex wrench (sold separately) Installing the batteries (Battery size: AAA) After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed. Connecting the TV with an SBB or STB ETH MODEM Data Cable [TV Rear Panel] 1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ➣ Use data communication. List of Vendors and Compatible Data Cables Supplied with the TV ♦ Refer to the code label on the data cables. Note the labeled end. Confirm the code on the Code Label Note the labeled end. Vendor OCC NXTV nStreams MTI Cable code BN39-00865B BN39-01011B BN39-01110A BN39-01011C Installing the LED TV Stand ♦ HG40NA590 / HG46NA590 / HG40NA790 / HG46NA790 / HG55NA790 Components When installing the stand, use the provided components and parts. A 1 EA B 1 EA C x8 (M4 X L12) Stand (depending on the model) Guide Stand D x4 (M4 X L12, SECURITY) Screws 1 2 C x4 (M4 X L12) B A Rear 33 Side View Top View Front ATTENTION DO NOT USE DO NOT USE DO NOT USE CHEMICALS GREASE OIL (Correct assembly) ✎ Place a soft cloth over the table to protect the TV, and then place the TV ✎ on the cloth screen side down. Insert the Stand Guide into the slot on the bottom of the TV. (Incorrect assembly) 4 C x4 (M4 X L12) D x4 (M4 X L12, SECURITY) ♦ Hotel Mount Kit Bolt + Nut Viewing the Connection Panel #@ Long Bolt (2EA) Short Bolt (2EA) Top Bottom Nut (2EA) Washer (2EA) To affix the stand to a flat surface such as a dresser top, desk top, or entertainment center, use the Hotel Mount Kit as shown. ✎ Make sure to distinguish between the front and back of the stand and the ✎ Stand Guide when assembling them. Make sure that at least two people lift and move the LED TV. ✎ Lay the product down, with the screen facing down, and then fasten the screws to the stand. ♦ Assembling the swivel The 32" and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60 degrees left and right, or 90 degrees left and right. 60" 90" Leaving the BRACKET HOLDER SWIVEL unchanged lets the TV swivel 20° left and right. To let the TV swivel 60° left and right, rotate the BRACKET HOLDER SWIVEL 180°, and then assemble the stand as shown above. To let the TV swivel 90° left and right, remove the BRACKET HOLDER SWIVEL and assemble the stand as shown above without the BRACKET HOLDER SWIVEL. 1 ! 0 2 9 8 3 - SIDE - 4 @ 5 1 6 7 ➣ The product color and shape may vary depending on the model. 1 USB (5V 0.5A) / CLONING, (HDD 5V 1A) / CLONING 2 LAN 3 COMPONENT IN / AV IN 4 AUDIO OUT 5 PC IN 6 DIGITAL AUDIO OUT (OPTICAL) 7 ANT IN 8 VOL-CTRL 9 EX-LINK 0 PC / DVI AUDIO IN ! DATA @ HDMI IN 1 (DVI), 2 (ARC), 3 # VARIABLE AUDIO OUT Notice When in the Hotel mode (Interactive or Standalone), the Channel menu items in the Menu OSD, except for Channel List, are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel option menu. Hotel Plug & Play is not supported in B-LAN models (D478/578). Hotel Plug & Play The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup, and Picture mode Setup once, when power is first turned ON. Setup also runs automatically after you have executed a Service Reset. ♦ UI Scenario If you select Factory Reset Type Local Set 32P6AF0D US Setup > Plug & Play Easy Set up Standalone Only Standalone mode is set. Basic Model SVC Model Tuner Light Effect Ch Table HA477 477 SI_ATC2 OFF NONE • Interactive • Standalone Plug & Play • Standalone Only If you select Next Interactive Interactive Hospitality Option Menu Front Color NONE After 3 seconds TV will enter the RF mode. Press Power OFF to exit. If you select Factory Reset, the TV resets all values to their factory defaults and then displays the Hotel Plug & Play menu. Go to the first Hotel Plug & Play screen above right labeled Setup>Plug & Play. If you select Standalone Plug & Play Setup > Menu Language Select the language you want to use Select English as the language • English Next • Español • Français NOT connected WIRED Network Setup > Network Settings (1/5) The next step is to set up a wireless network using an internal LAN Adapter. If you want to connect to your wired network, plug in a network cable. Previous Next Skip Connected WIRED Network Setup > Network Settings (1/5) Network cable connected. Press Next to configure your wired network settings. If you want to connect to your wireless network, unplug the network cable. Previous Next Skip E Setup > Network Settings (2/5) Select your wireless router from the list. TEW-672GR_C4AEB0 HP ureadymobile ureadyintranet setup NINARICCI Refresh WPS(PBC) Previous Next Skip E E Setup > Auto Program (1/5) Let's find and store channels on your TV. Do you need to search for channels? • Yes, I need to. • No, I don't need to. My set-top box provides all the channels that are available, so I don't need to searh for channels. Previous Next Skip Setup > Auto Program (2/5) Set the search options for auto tuning. If you select "Yes, Air c Cable I need to" Previous Next Skip Setup > Auto Program (3/5) E Set the parameters for cable auto program. • Digital Cable System STD • Analog Cable System STD Select the digital cable system If you select "No, I don´t need to." Setup > Clock (3/3) Add Daylight Savings Time? • Off • On Switch are DST function off. Previous Next Skip Setup > Clock (2/3) What time zone are you in? E • Newfoundland • Atlantic • Eastern • Central • Mountain Select Eastern if you are located in that region. Previous Next Skip E Setup > Auto Program (4/5) Auto Program is finding channels for you ... Cable 64 DTV Air 0 Air 0 DTV Cable 0 Cable 0 E Setup > Picture Mode Select Picture Mode. • Dynamic • Standard Previous Next Setup > Clock (1/3) Set the Clock Mode. • Auto • Manual E Set the current time automatically using the time from the digital broadcast. E Setup > Auto Program (5/5) Previous Next Skip E Auto Program is complete 110 channels are memorized. DTV Air 40 Air 30 DTV Cable 20 Cable 10 Previous Next Skip Stop OK E Setup > Network Settings (4/5) Setup > Network Settings (5/5) Enter security key. *********0 11 entered WPS(PBC) 12345 6 789 0 Del All qwe r t y u i op *^ a s d f g h j k l ~ ? ! Previous Next z x c v b nm . ,@ Skip Caps Shift 1 Space Wiress network and Internet connection failed. E SEC_LinkShare MAC Address IP Address Subnet Mask Gareway DNS Server 00:40:30:31:78:01 169.254.243.193 255.255.0.0 0.0.0.0 0.0.0.0 IP auto setting failed. Try the follwing to set your IP address automatically. Or set your IP address manually by selecting 'IP Settings'. -Ensure DHCP server is enabled on router and unplug and re-plug in the router. -Contact your Internet Service Provider for more information. Previous IP Settings Retry Next E IP Mode IP Address Subnet Mask Gateway DNS Mode DNS Server IP Settings OK Auto 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 Auto 0 . 0 . 0 . 0 R Return Standalone Hotel Option Menu Press Power OFF to exit. ♦ Hotel Plug & Play OSD - Initial Highlight: Interactive - If you select the Standalone Only button, the Standalone hotel mode is set by default and the "Standalone mode is set" OSD appears for 3 seconds. - TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for 3 seconds. - If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the Interactive menu. - If you select the Standalone Plug & Play mode, the "Select Menu Language" OSD appears. ♦ Select Menu Language OSD - If you select Standalone from the "Select Hotel TV Mode" OSD, the "Select Menu Language" OSD appears. - Initial Highlight : English - Display time: OSD timeout and operation are the same as Samsung's consumer TV models. - If you press the Enter key, the "Select Country" OSD appears. ♦ Clock Mode OSD - Initial Highlight: Auto. - Display time: 30 seconds. - The Clock Set item OSD appears if you select Manual. - If you press the Enter key after setting the clock, or while in Auto clock set, the Picture Mode OSD appears. ♦ Set daylight saving time OSD - Initial Highlight: Off - If you press the Enter key, the Select the DST area OSD appears. ♦ Picture Mode OSD - Initial Highlight: Dynamic. - The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode. - After you select the picture mode, the TV displays the Standalone Setup Menu OSD. Press power off to exit. ♦ Auto Search Mode OSD - If you select the Skip option, the TV displays the Clock Mode OSD. - If you press the Enter key, the TV auto searches for channels. - The OSD Display time, which starts at the time that Auto Store is completed goes to the time Auto Sort starts, is 30 seconds. [Hotel-QSG-NA]BN68-04353A-01ENG.indd 1 2012-04-04 오전 10:54:33