Samsung HLN467W User Manual (ENGLISH) - Page 23
Viewing an External Signal Source
UPC - 036725246706
View all Samsung HLN467W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BP68-00142A-3 5/27/03 10:08 AM Page 44 Operation 5 Move the joystick right to select off, then move the joystick up or down to select "on". When any of the timers are set, the "Timer" LED will illuminate (front or side panel of TV.). 6 When you are finished, move the joystick right. 7 If you want to set the Off time, move the joystick down to select the "Off Time". Set the "Off Time" just as you set the "On Time". 8 If you want to set the volume level or channel when the TV turns on, move the joystick down to select "On Timer Vol." or "On Timer CH". Move the joystick right to set the volume level or to select the channel you want when the TV turns on. Press the Menu button to return to normal viewing. Setting the Sleep Timer You can set your TV to automatically turn off after a preset interval. 1 Press the Sleep button on the remote control. 2 You'll see "Off" at the bottom of the screen. Press the Sleep button to select the time interval for the TV to stay on. The interval ranges from 10 to 360 minutes. 44 Viewing an External Signal Source Selecting the Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable). 1 Make sure that the remote control is controlling the TV set. Press the MODE button and make sure that the "TV" LED is illuminated. 2 Press TV/VIDEO on the remote control, and the following on-screen menu will appear. 3 Move the joystick up or down to select a particular signal source, and then press the joystick to activate it. When you connect equipment to the TV, you can choose between the following sets of jacks: Video 1, Video 2, S-video 1, S-video 2, Component 1, Component 2, Component 3, DVI or PC on the TV's rear panel, and Video 3 or S-Video 3 on the TV's side panel. Remote Control VCR/DVD Buttons Flip the cover of the remote control up to access buttons that can control the tape functions of a connected VCR or DVD, including Rewind, Play, Fast Forward, Stop and Pause. 1 Flip the cover of your remote control unit for access to the tape function controls. Press the appropriate buttons to control your VCR or DVD. 45