Samsung HLN617W1 User Manual (ENGLISH) - Page 11
Connecting VHF and UHF Antennas
View all Samsung HLN617W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adapter. Use a screwdriver to tighten the screws. 2 Plug the adapter into the ANT-A terminal on the back panel of the TV. Antennas with 75-ohm Round Leads If your antenna looks like this: 1 Plug the antenna lead into the ANT-A terminal on the back panel of the TV. it is an antenna with 75-ohm round leads. 20 Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting them to the TV. This requires a combiner attachment, which you can buy at an electronics store. 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the ANT-A terminal on the back panel of the TV. 21