Samsung HLP4674W Instruction Manual - Page 16
Connecting VHF and UHF Antennas, Antennas with 300-ohm Flat Twin Leads
UPC - 036725246010
View all Samsung HLP4674W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adapter into the "ANT 1 IN" terminal on the rear panel. Antennas with 75-ohm Round Leads If your antenna looks like this: 1 Plug the antenna lead into the "ANT 1 IN" terminal on the rear panel. it is an antenna with 75-ohm round leads. English - 16
English - 16
Connections
Connecting VHF and UHF Antennas
If you do not have a cable system, you will need to connect an antenna to your TV.
Antennas with 300-ohm Flat Twin Leads
If your antenna looks like this:
it has 300-ohm flat twin leads.
1
Place the wires from the twin
leads under the screws on the
300-75 ohm adaptor (not
supplied). Use a screwdriver
to tighten the screws.
2
Plug the adapter into the
“ANT 1 IN” terminal on the
rear panel.
Antennas with 75-ohm Round Leads
If your antenna looks like this:
it is an antenna with 75-ohm round leads.
1
Plug the antenna lead into the
“ANT 1 IN” terminal on the
rear panel.