Samsung HMX-T10BN User Manual (user Manual) (ver.1.0) (English) - Page 106
Safely Remove Hardware, USB Mass Storage Device, Stop., Stop a Hardware device
![]() |
UPC - 036725303560
View all Samsung HMX-T10BN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
using with a Windows computer To disconnect the USB cable To disconnect the USB cable after completing the file transfer, you must follow these steps: 1. Click the "Safely Remove Hardware" icon on the taskbar. 2. Select "USB Mass Storage Device," and then click "Stop." 3. If the "Stop a Hardware device" window appears, click "OK." 4. Disconnect the USB cable from the camcorder and PC. Use the provided USB cable. (Supplied by Samsung) Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction. Use the AC power adaptor to power the camcorder when transferring files to your computer. When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction. If you disconnect the USB cable from the PC or the camcorder while transferring files, the data transmission will stop and the data may be damaged. If you connect the camcorder to a PC via a USB HUB or simultaneously connect the camcorder along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC, and then reconnect the camcorder. Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer, open the drive that corresponds to your camcorder, find Intelli-studio, and then run iStudio.exe. 96
![](/manual_guide/products/samsung-hmxt10bn-user-manual-user-manual-ver10-english-32a3aa3/106.png)