Samsung HMX-T10WN User Manual (user Manual) (ver.1.0) (English) - Page 117
SYMPTOMS AND SOLUTIONS, Power, Display
UPC - 036725303638
View all Samsung HMX-T10WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
SYMPTOMS AND SOLUTIONS If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Power Symptom The camcorder does not turn on. The power turns off automatically. Power cannot be turned off. The battery discharges quickly. Explanation/Solution The battery may not be installed in your camcorder. Insert the battery into the camcorder. The inserted battery may be discharged. Charge the battery or replace it with a charged one. If you use the AC power adaptor, make sure it is properly connected to a wall outlet. Is "Auto Power Off" set to "5 Min"? If no button is pressed for about 5 minutes, the camcorder is automatically turned off ("Auto Power Off"). To disable this option, change the setting of "Auto Power Off" to "Off." page 80 The battery is almost exhausted. Charge the battery or replace it with a charged one. Remove the battery or unplug the AC power adaptor, and connect the power supply to the camcorder again before turning it on. The temperature is too low. The battery is not fully charged. Charge the battery again. The battery has reached the end of its lifespan and cannot be recharged. Use another battery. Display Symptom Explanation/Solution The TV screen or LCD display has distorted images or has stripes at the top/bottom or on the left/right. Unknown image appears on the LCD screen. Unknown indicator appears on the screen. This can occur when recording or viewing a 16:9 ratio image on a 4:3 ratio TV, or vice versa. For more details, see the display specification. page 90 The camcorder is in Demo mode. If you do not want to see Demo images, change "Demo" to "Off." page 85 A warning indicator or message appears on the screen. pages 102~106 An afterimage remains on the LCD This occurs if you disconnect the AC power adaptor or remove the screen. battery before turning the power off. The image on the LCD screen looks Ambient light is too bright. Adjust the brightness and angle of the 107 dark. LCD.