Samsung HP-S5053 User Manual (ENGLISH) - Page 33
Notes, Select the correct signal source STD, HRC, and, IRC by pressing the, button, then press
UPC - 036725250536
View all Samsung HP-S5053 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select "Start". Notes • If the antenna is connected to ANT 1 IN (CABLE), select "Cable" and if it is connected to ANT 2 IN (AIR), select "Air". • If both ANT 1 IN and ANT 2 IN are connected, select the "Air + Cable". Plug & Play Select the antennas to memorize. Air Start Cable Start Air + Cable Start Move Enter Skip 4 Select the correct signal source (STD, HRC, and IRC) by pressing the ▲ or ▼ button, then press the ENTER button. Note • STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory" on page 38. 5 The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button at any time to interrupt the memorization process. Press the ENTER button, then the menu to set the clock mode is automatically displayed. 6 Press the ENTER button to select "Clock Mode". Press the ▲ or ▼ button to select "Auto" or "Manual", then press the ENTER button. Plug & Play Select the cable system. STD HRC IRC Move Enter Skip Plug & Play Auto Program in progress. Cable Channel 67 Stop Enter Skip Plug & Play Auto Program is completed. 14 Channels were memorized. Air : 9 , Cable : 5. OK Enter Skip Plug & Play Select the clock mode. Clock Mode : EMngalnisuhal Auto Continued... Move Enter Skip 33