Samsung HT-EM53C User Manual Ver.1.0 (English) - Page 22

Connections Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below. 5V 500mA Wired Network SPEAKERS OUT SURROUND SURROUND IMPEDANCE : 3 LAN WIRELESS HDMI OUT AUX VIDEO IN OUT OPTICAL DIGITAL AUDIO IN FM ANT Broadband modem (with integrated router) Broadband service Or Wireless IP sharer Broadband service Router Broadband service Broadband modem | NOTE | \ Internet access to Samsung's Software Update server may not be allowed, depending on the router you use or your ISP's policy. For more information, contact your ISP (Internet Service Provider). \ DSL users, please use a router to make a network connection. \ To use the AllShare Play function, you must connect your PC to your network as shown in the illustrations on the left. The connection can be wired or wireless. | NOTE | \ If your wireless IP router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network. \ Set your wireless IP router to Infrastructure mode. Ad-hoc mode is not supported. \ The product supports only the following wireless security key protocols: - WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) \ Select a channel on the wireless IP router that is not currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure. \ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new WiFi certification specifications. \ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc). | 22 English )5 JOEE