Samsung HT-J4500 User Manual - Page 18

Settings ✎✎If you don't press any buttons while recording, the screen saver will be enabled. ✎✎Sound effects, such as DSP, EQ, etc., are not recorded during FM radio recording. ✎✎The radio is recorded at a set, default volume even if you change the volume or press the MUTE button during the recording process. ✎✎If you remove the USB device or Power Cable during the recording process, the portion of the file which has already been recorded may not play back. ✎✎Recording will not start if the remaining free space in the USB storage device is less than 2MB. ✎✎If the USB device is removed or has insufficient space (under 2MB), the appropriate message is displayed and the recording stops. Network Setup When you connect this product to a network, you can use network based applications and functions such as BD-LIVE and upgrade the product's software through the network connection. Configuring Your Network Connection If you skipped network setup during the Initial Setup, follow the instructions below to configure the home theater's network connection. Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the automatic procedure below. If it is static, you must use the manual procedure that follows. !! Before you begin, confirm that the product is connected to your router with a network cable. ĞĞ Automatic To start the configuration process, follow these steps: 1. In the Home menu, select Settings, and then press the v button. 2. Select Network, and then press the v button. 3. Select Wired Network Settings, and then press the v button. The Wired Network Settings screen appears. 4. Press the + button on the Internet Protocol Setup menu. Use $% button to select Auto, and then press the v button. Settings Picture Wired Network Settings SoundInternet Protocol Setup : Auto NetwoIrPkAddress :0 0 0 0 SystemSubnet Mask LanguaGgaeteway :0 0 0 0 :0 0 0 0 SecurDitNy S : Auto GeneraDlNS Server :0 0 0 0 Support > Move " Select ' Return 5. The Network function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically. 6. After the Network function has acquired the network values, press the RETURN button. 7. Select Network Test, and then press v. The home theater validates the network connection. When it is done, press the RETURN button. ĞĞ Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. You can get the Network Settings from your Internet Service Provider (ISP). Settings Picture Wired Network Settings SoundInternet Protocol Setup : Manual NetwoIrPkAddress :0 0 0 0 SystemSubnet Mask LanguaGgaeteway : 255 255 255 0 :0 0 0 0 SecurDitNy S : Manual GeneraDlNS Server :0 0 0 0 Support > Move " Select ' Return 1. Follow the first four steps in the Automatic procedure, but select Manual instead of Auto in Step 4. 18 - English