Samsung HT-X710T User Manual (ENGLISH) - Page 53

Check/Remedy, Using the RESET function will erase all stored settings. - troubleshooting

Get Samsung HT-X710T PDF manuals and user guides
UPC - 036725616813
View all Samsung HT-X710T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

EnG ● troubleshooting SYMPTOM Check/Remedy • The main unit is not working. (Example: The power goes out or strange noise is heard.) • The DVD player is not working normally. • Turn off the power and hold the STOP (@) button on the remote control for longer than 5 seconds. STAND BY RED LED blinks on the display and all settings will return to the default values. Using the RESET function will erase all stored settings. Do not use this unless it is necessary. The password for rating level has been forgotten. • While "NO DISC" message appears on the display of main unit, hold the main unit's STOP (@) button for longer than 5 seconds. "INITIAL" appears on the display and all settings will return to the default values. • Press the POWER button. Can't receive radio broadcast. Using the RESET function will erase all stored settings. Do not use this unless it is necessary. • Is the antenna connected properly? • If the antenna's input signal is weak, install an external FM antenna in an area with good reception. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
³²
ENG
●
TROUBLESHOOTING
SYMPTOM
Check/Remedy
• The main unit is not working.
(Example: The power goes out
or strange noise is heard.)
• The DVD player is not working
normally.
• Turn off the power and hold the
STOP
(
@
)
button on the
remote control for longer than 5 seconds. STAND BY RED
LED blinks on the display and all settings will return to the
default values.
Using the RESET function will erase all stored settings.
Do not use this unless it is necessary.
The password for rating level has
been forgotten.
• While “NO DISC” message appears on the display of main
unit, hold the main unit's
STOP
(
@
)
button for longer than 5
seconds. “INITIAL” appears on the display and all settings will
return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless it is necessary.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.