Samsung HT-Z310 User Manual (ENGLISH) - Page 29

HDmi fUnCtiOn EnG resolution Selection This function allows the user to select the screen resolution for HDMI output. In Stop mode, press and hold the SD/HD (Standard Definition/ High Definition) button on the remote control. ~ Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p. ~ SD(Standard Definition) resolution is 480p and HD (High Definition) resolution is 720p, 1080i/1080p. ● COnnECtiOnS M ` If the TV does not support the configured resolution, you will not be able to see the picture properly. ` When an HDMI cable is connected, composite and component video signals are not output. ` See your TV owner's manual for more information on how to select the TV's Video Input source. Why use HDmi (High Definition multimedia interface)? This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection. Using anynet+(HDmi-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+. 1. Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 25) 2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) ~ You can operate the Home Theater by using the TV With anynet+ You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control. remote control. (Available TV buttons and , buttons, ~ button) if you select the tV Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ button on your TV remote control. • receiver : On : You can listen to audio through the Home Theater. • receiver : Off : You can listen to audio through the TV. MMOOVVEE EENNTTEERR EEXXIITT Move Enter Exit if you select the tHEatEr Select tHEatEr to connect and set the option of each item below. • View tV : If anynet+(HDMI CEC) is set to on and you select View TV, the home theater will automatically switch to digital in mode. • theater menu : you can access and control the Home theater menu. • theater Operation : The Home Theater disc playback information will be displayed. You can control the Disc operation of the Home Theater such as title,chapter and subtitle change. • receiver : On : You can listen to audio through the Home Theater. • receiver : Off : You can listen to audio through the TV. MOVE ENTER EXIT Move Enter Exit M ` In case that you chose 'View TV', if you want to listen to TV sound through Digital In, you have to connect the optical cable between the TV and the Home Theater. 2