Samsung HW-B450/ZA User Manual - Page 34

Troubleshooting

Page 34 highlights

13 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Soundbar does not turn on. ;; Check whether the power cord of the Soundbar is correctly inserted into the outlet. Soundbar works erratically. ;; After removing the power cord, insert it again. ;; Power cycle the external device and try again. ;; If there is no signal, the Soundbar automatically turns off after a certain period of time. Turn on the power. (See page 8.) If the remote control does not work. ;; Point the remote directly at the Soundbar. ;; Replace the batteries with new ones. Soundbar does not output any sound. ;; The volume of the Soundbar is too low or muted. Adjust the volume. ;; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device. ;; For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Select Soundbar) ;; The cable connection to the Soundbar may not be loose. Remove the cable and connect again. ;; Remove the power cord completely, reconnect, and turn the power on. ;; Reset the product and try again. (See page 32.) Subwoofer does not output any sound. ;; Check whether the LED indicator on the rear of the Subwoofer is on in blue. Reconnect the Soundbar and Subwoofer if the indicator is blinking slowly in blue or turned red. (See page 18.) ;; You may experience an issue if there is an obstacle between the Soundbar and Subwoofer. Move devices to an area away from obstacles. ;; Other devices sending radio frequency signals in proximity may interrupt the connection. Keep your speaker away from such devices. ;; Remove and reconnect the power plug. The Subwoofer volume is too low. ;; The original volume of the content you are playing may be low. Try adjusting the Subwoofer level. (See page 13.) ;; Bring the Subwoofer speaker closer to you. Soundbar does not appear on the Bluetooth device list of the TV. ;; Disconnect the power cord of the Soundbar completely and reconnect, and then try searching again. (See page 21.) ;; Connect the TV and Soundbar with an optical cable, and select the "D.IN" mode by pressing the (Source) button on the top of the Soundbar. See if the audio output works normally, and try searching again. (See page 21.) ENG - 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

ENG - 34
13
TROUBLESHOOTING
Refer to the table below if this product does not function properly. If the problem you are experiencing
is not listed below or if the instructions below do not help, turn off the product, disconnect the power
cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
Soundbar does not turn on.
;
Check whether the power cord of the
Soundbar is correctly inserted into the
outlet.
Soundbar works erratically.
;
After removing the power cord, insert it
again.
;
Power cycle the external device and try
again.
;
If there is no signal, the Soundbar
automatically turns off after a certain
period of time. Turn on the power.
(See page 8.)
If the remote control does not work.
;
Point the remote directly at the Soundbar.
;
Replace the batteries with new ones.
Soundbar does not output any sound.
;
The volume of the Soundbar is too low or
muted. Adjust the volume.
;
When any external device (STB, Bluetooth
device, mobile device, etc.) is connected,
adjust the volume of the external device.
;
For sound output of the TV, select
Soundbar. (Samsung TV: Home (
) →
Menu → Settings (
) → All Settings (
)
→ Sound → Sound Output → Select
Soundbar)
;
The cable connection to the Soundbar may
not be loose. Remove the cable and
connect again.
;
Remove the power cord completely,
reconnect, and turn the power on.
;
Reset the product and try again.
(See page 32.)
Subwoofer does not output any sound.
;
Check whether the LED indicator on the
rear of the Subwoofer is on in blue.
Reconnect the Soundbar and Subwoofer if
the indicator is blinking slowly in blue or
turned red. (See page 18.)
;
You may experience an issue if there is an
obstacle between the Soundbar and
Subwoofer. Move devices to an area away
from obstacles.
;
Other devices sending radio frequency
signals in proximity may interrupt the
connection. Keep your speaker away from
such devices.
;
Remove and reconnect the power plug.
The Subwoofer volume is too low.
;
The original volume of the content you are
playing may be low. Try adjusting the
Subwoofer level. (See page 13.)
;
Bring the Subwoofer speaker closer to you.
Soundbar does not appear on the Bluetooth
device list of the TV.
;
Disconnect the power cord of the Soundbar
completely and reconnect, and then try
searching again. (See page 21.)
;
Connect the TV and Soundbar with an
optical cable, and select the “
D.IN
” mode by
pressing the
(Source)
button on the
top of the Soundbar. See if the audio output
works normally, and try searching again.
(See page 21.)