Samsung HW-Q990C User Manual - Page 23

Method 2. Connecting via Wi-Fi (Wireless Network) To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. The initial connection 1. Install and launch the SmartThings app from your mobile device (smartphone or tablet). 2. On the app, follow the screen instructions to add the Soundbar. • The automatic pop-up (the second screenshot below) may not show on some devices. If the pop-up window does not appear, press " " on the Home screen. The Soundbar is added to the app. • The illustration below may differ according to the app version. SmartThings App Launch App Auto pop-up Add device Using the SmartThings Hub • You can use the Soundbar's SmarThings Hub function to connect the IoT devices (bulbs, plugs, sensors etc.) that require SmartThings Hub. • To use the SmartThings Hub function, you must register the Soundbar in the SmartThings app. Registering an IoT device on the SmartThings app 1. Add the Soundbar in the SmartThings app according to the instructions in the "Method 2. Connecting via Wi-Fi (Wireless Network) > The initial connection" section. 2. Tap the Soundbar device card. 3. Tap SmartThings Hub at the bottom of the screen. 4. Tap Using SmartThings Hub, and then tap Set up to activate the SmartThings Hub function. • When the SmartThings Hub function activates, unset changes to using. • SmartThings Hub device card will appear next to the Soundbar device card. 5. On the Home screen, tap " " to add an IoT device. • An IoT device card appears on the app when you successfully add an IoT device. • If you unplug the Soundbar, devices connected through the SmartThings Hub may be disconnected. You must reconnect the devices once they get disconnected. Deleting SmartThings Hub from the SmartThings app 1. On the devices screen , tap the Soundbar device card. 2. Tap SmartThings Hub at the bottom of the screen. 3. Tap Removing SmartThings Hub to deactivate the SmartThings Hub function. • When the SmartThings Hub function deactivates, using changes to unset. Connecting via Apple Airplay 2 • This feature may not be available in some countries. • This Samsung Soundbar supports AirPlay 2 and requires iOS 13.4 or later. With AirPlay 2, you can stream music, podcasts, and other audio from your Apple devices to the Samsung Soundbar. • To enable AirPlay2 in your Soundbar, you must first register the device with the Samsung Smart Things app by agreeing with the app's terms and conditions. • Make sure the Soundbar is powered on and connected to the same Wi-Fi network as your Apple device. • Select from an AirPlay-supported app or Control Center on your iPhone, iPad, or Mac. • Select the Soundbar from the list of available devices to play the current audio to. ENG - 23