Samsung HW-S61B User Manual - Page 40

11 SOFTWARE UPDATE Auto Update When the Soundbar is connected to the Internet, software updates automatically occur even when the Soundbar is turned off. •• To use the Auto Update function, the Soundbar must be connected to the Internet. The Wi-Fi connection to the Soundbar will be terminated if the Soundbar's power cord is disconnected or the power is cut off. If the power is cut off, when the power comes back on or you reconnect the power cord, turn on the Soundbar, and then reconnect it to the Internet. USB Update BotDtCo1m9V of the Soundbar SERVICE DC 19V SERVICE DIGITAL AUDIO IN (OPTICAL) HDMI (ARC) Micro USB to USB adapter Cable (not supplied) Samsung may offer updates for the Soundbar's system firmware in the future. When an update is available, you can update the Soundbar by connecting the USB drive that contains the update firmware to the SERVICE port of the Soundbar. 1. Go to (www.samsung.com) → search for the model name from the customer support menu option. •• For more information about update, refer to Upgrade Guide. 2. Download the upgrade file (USB type). 3. Unzip the file to create a folder with the file name. 4. Store the created folder in a USB and then connect it to the Soundbar. 5. Turn on the Soundbar. Then the product is updated within 3 minutes. LED Indicator White moves from left to right and right to left •• During update, do not turn it off or remove the USB. •• If the yellow LED is on after the software update is completed, this means that an additional update is in progress. When this happens, don't turn off the power or remove the USB. •• If update does not proceed, reconnect the Soundbar power cord. •• When the latest version is installed, no update is performed. •• Depending on the USB type, update may not be supported. •• If there is no update file available LED Indicator Red Blinks X3 •• If the update file is for the same version or lower LED Indicator Cyan Blinks X3 ENG - 40