Samsung HW-S801B/ZA User Manual - Page 20
Connecting to a TV that supports Dolby Atmos, Bitstream. For example, on a Samsung BD Player
View all Samsung HW-S801B/ZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting to a TV that supports Dolby Atmos Pre-connection Checklist • Dolby Atmos® is supported in "TV ARC" or "Wi-Fi" mode. • Make sure that the content supports Dolby Atmos®. Connect to the HDMI IN (ARC) port of your TV. HDMI IN (ARC) HDMI to Micro HDMI Cable Top of the Soundbar SERVICE HDMI (ARC) Rear of the Soundbar LED indicator White On → Off "TV ARC" 1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the figure. 2. Turn on the Soundbar and TV. 3. TV sound is output from the Soundbar. TV menu Wi-Fi LED indicator White On → Off "Wi-Fi" 1. Connect the Soundbar and TV to the same wireless network (Wi-Fi). 2. For sound output of the TV, select Soundbar. 3. TV sound is output from the Soundbar. NOTE • When you use Dolby Atmos®: If the input source is Dolby Atmos®, refer to "Output specifications for the different sound effect modes" on page 12. • Configuring Dolby Atmos® on your BD player or other device connected to the TV. Open the audio output options on the settings menu of your BD player or other device and make sure that "No Encoding" is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed). • This function is available in some Samsung TVs and some Soundbar models. ENG - 20