Samsung HW-T550 User Manual - Page 34

7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the 10 SOFTWARE Bracket-Wall Mounts on the Holder-Screws on the wall. UPDATE Samsung may offer updates for the Soundbar's system firmware in the future. USB port DIGITAL AUDIO IN (OPTICAL) HDMI USB (5V 0.5A) HDMI TO TV (ARC) DC 24V HDMI IN 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws. •• Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the Holder-Screws. USB (5V 0.5A) If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at https://www.samsung.com/us/support/ downloads/. Then, select the product type or enter the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary. How to check the Firmware version 1. Turn off the Soundbar. 2. Press and hold the (Sound Control) button for about 5 seconds on the remote control. 3. Each version appears in the following order on the Soundbar display. (Software version → HDMI → Tx → Rx ) •• Tx : Wireless Tx module in the Soundbar. •• Rx : Wireless Rx module in the Subwoofer. •• R2 VERSION DISPLAY -- No connect rear R2--- ENG - 28