Samsung HZ10W User Manual (ENGLISH) - Page 13
Connecting to a power source - camera battery
UPC - 044701010111
View all Samsung HZ10W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting to a power source You should use the rechargeable battery SLB-10A supplied with the camera. Be sure to charge the battery before using the camera. SLB-10A rechargeable battery Specification Model Type Capacity Voltage Charging time (When the camera is turned off) SLB-10A Lithium Ion 1050mAh 3.7V Approx. 150MIN Number of images and battery life: Using the SLB-10A Still image Battery life /Number of images Conditions Approx. 135 MIN/ Approx. 270 shots Using the fully charged battery, Auto mode, 10M image size, Fine image quality, Shot to shot interval: 30sec. Changing the zoom position between the Wide and the Tele after every shot. Using the flash on every second shot. Using the camera for 5 minutes and then Powering it off for 1 minute. Movie Recording time Conditions Approx. 125 Using the fully charged battery MIN 640x480 image size 30fps frame rate. These figures are measured under Samsung's standard conditions and shooting conditions and may vary depending on the user's methods. These figures are measured under OIS shooting condition. Several videos were recorded in succession to determine the total recording time. Important information about battery usage. When the camera is not used, turn off the camera power. Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures. During extended use of the camera, the camera body may become warm. This is perfectly normal. 012