Samsung K5100 User Manual - Page 2
Specifications, Support Menu, Other Information - tv
View all Samsung K5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
xxIf the TV has no input during the time period set in Auto Protection Time, the Screen saver will run. xxThe power-saving mode of some external hard disk drives may be released automatically when your connect them to the TV. xxIf you use a USB extension cable, the TV may not recognize the USB device or may not be able to read the files on the device. xxIf a USB device connected to the TV is not recognized, the list of files on the device is corrupted, or a file in the list is not played, connect the USB device to a PC, format the device, and check the connection. xxIf a file you deleted from the PC is still found when you run Media Play, use the "Empty the Recycle Bin" function on the PC to permanently delete the file. xxPhotos only supports the sequential jpeg format. xxThe Videos option does not support the scene search and thumbnail functions. xxIf the number of files and folders saved on a USB storage device is over approximately 4000, the files and folders may not appear and some folders may not open. xxThe maximum displayed number of files, including sub folders, in one folder of a USB storage device is 1000. xxThe media may not play smoothly if you use a USB device rated lower than USB 2.0. Videos yySupported Video Formats File Extension Container Video Codec Motion JPEG *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.3gpp *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.divx *.dat H.264 BP/ MP/HP AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS H. 264 BP / MP / HP Divx 3.11 / 4 / 5 / 6 MPEG4 SP/ ASP Window Media Video v9(VC1) MPEG2 Resolution 640x480 1920x1080 Frame rate(fps) MAX 30 Bit rate (Mbps) 8 30 Audio Codec Dolby Digital LPCM ADPCM (IMA, MS) AAC HE-AAC WMA Dolby Digital Plus MPEG(MP3) DTS (Core , LBR) G.711(ALaw, μ-Law) Movie 01.avi ► 00:04:03 / 00:07:38 1/1 MPEG1 SUM E Pause L Jump T Tools R Return 1. In the Media Play menu, press the ◄ or ► button to select Videos, and then press the ENTERE button. 2. Press the buttons to select a video in the file list. 3. Press the ENTERE button or ∆ (Play) button. -- The file name is displayed on the top of the screen with the playing time. -- If video time information is unknown, playing time and the progress bar are not displayed. -- During video playback, you can search using the ◄ and ► buttons. ✎✎ In this mode, you can play movie clips contained in a game, but you cannot play the game itself. yySupported Subtitle Formats -- External Name File extension MPEG-4 timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub or .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass -- Internal Name Xsub SubStation Alpha Advanced SubStation Alpha SubRip MPEG-4 Timed text Container AVI MKV MKV MKV MP4 Format Picture Format Text Format Text Format Text Format Text Format *.webm WebM VP8 1920x1080 6~30 20 Vorbis Other Restrictions yyCodecs may not function properly if there is a problem with the content. yyVideo content will not play or will not play correctly if there is an error in the content or container. yySound or video may not work if they have bit rates/frame rates above the TV's compatibility ratings. yyIf the Index Table contains an error, the Seek (Jump) function will not work. yyWhen the TV is playing video over a network connection, the video may not play smoothly because of data transmission speeds. yySome USB/digital camera devices may not be compatible with the TV. yyWhen the TV is playing a video at a bit rate of 10 Mbps or higher, the menu screens may be displayed slowly. Video Decoder Supports up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 / AP L4 are not supported. GMC 2 or above is not supported. Audio Decoder WMA 10 Pro supports up to 5.1 channels. Supports up to the M2 profile. WMA lossless audio is not supported. QCELP and AMR NB/WB are not supported. Vorbis is supported for up to 2 channels. Dolby Digital Plus is supported for up to 5.1 channels. The DTS LBR codec is only available for MKV / MP4 /TS containers. - 9 - Trouble Powering On Stand Assembly Cannot find a channel Poor Picture The TV image does not look as good as it did in the store. The picture is distorted has macroblock error, small block, dots, pixelization. The color is wrong or missing. There is poor color or brightness. There is a dotted line on the edge of the screen. The picture is black and white. When changing channels, the picture freezes or is distorted or delayed. Sound Problems There is no sound or the sound is too low at maximum volume. The picture is good, but there is no sound. The speakers are making an inappropriate noise. No Picture, No Video The TV will not turn on. The TV turns off automatically. Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button on the TV or remote and the light should blink about 5 times before the TV turns on. If you find that you are having trouble powering on your Samsung television, there are a number of things to check before making a call to the service department. yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the mouse. Then try turning your TV on. If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box. • If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide. • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program) First, perform the Picture Test and to see if your TV is displaying the test image properly. Go to MENU - Support - Self Diagnosis - Picture Test If the test image is properly displayed, the poor picture may be caused by the source or signal. • If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. • Cable/Satellite subscribers: Try HD channels from the channel line up. • Air/Cable Antenna connection: Try HD channels after running Auto Program. ✎✎ Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up scaled SD content is low. • Adjust the Cable/Set top box video output resolution to 1080i or 720p. • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in sports and action movies. • A weak signal can cause picture distortion. This is not a TV problem. • Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels. • If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause color problems or a blank screen. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness) • Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving ) • Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset) • If the picture size is set to Screen Fit, change it to 16:9. • Change the cable/satellite box resolution. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1 on the TV. • If the TV is connected to a cable box, reset the cable box. (Disconnect and then reconnect the box's AC cord, and then wait until the cable box reboots. It may take up to 20 minutes.) • Set the output resolution of the cable box to 1080i or 720p. Perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may be caused by the source or signal. • Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV. • If you are using an external device, check the device's audio output option Ex. you may need to change your cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable. • Reboot the connected device by reconnecting the device's power cable. • Check the cable connections. Make sure a video cable is not connected to an audio input. • For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion. • Perform the Sound Test as explained above. • Make sure the AC power cord is securely plugged into the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to 'Remote control does not work' below. • Ensure the Sleep Timer is set to Off in the Time menu. • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged securely into the wall outlet and the TV. • When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal. K4100_K5100_BN68-07696J-03_Eng.indb 2 - 13 - Music ■■Playing selected video/music/photo files I Love You.mp3 1st Album Pop 2010 4.2MB 01:10 / 04:02 Playlist 3/15 I Love you Jhon Music 1 No Singer Music 2 No Singer Music 3 No Singer Music 4 No Singer Music 5 No Singer USB E Pause L Jump T Tools R Return 1. In the Media Play menu, press the ◄ or ► button to select Music, and then press the ENTERE button. 2. Press the buttons to select the desired Music in the file list. 3. Press the ENTERE button or ∆ (Play) button. ✎✎ During music playback, you can search using the ◄ and ► button. ✎✎ � (REW) and µ (FF) buttons do not function during play. ✎✎ Media Play only displays files with an MP3 or PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device. ✎✎ If the sound is abnormal when the TV plays MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.) Photos Normal Image1024.jpg 1024x768 2010/2/1 3/15 1. On the File List screen, highlight a file, and then press the Yellow button on your remote. 2. Repeat Step 1 to select multiple files. ✎✎ NOTE xxA c mark appears to the left of the selected files. xxTo cancel a selection, press the Yellow button again. xxTo deselect all selected files, press the TOOLS button, select Deselect All, and then the ENTERE button. 3. Press the TOOLS button, select Play Selected Contents, and then press the ENTERE button. ■■Playing a video/music/photo folder 1. With the folders on your USB device displayed, use the buttons to highlight a folder. 2. Press the TOOLS button, select Play Folder, and then press the ENTERE button. Media Play - Additional Functions ■■Videos/Music/Photos Play Option menus When playing a file, press the TOOLS button. Category Operation Videos Title You can select another video file to play directly. c Repeat Mode You can play movie and music files repeatedly. c Picture Size You can adjust the picture size to your preference. c Picture Mode You can adjust the picture setting. c Music c Photos c Sound Mode You can adjust the sound setting. c c c Subtitle Settings You can play the video with Subtitles. This function only works if the subtitles have the same file c name as the video. Audio Format You can select the digital audio output format. c E Pause L Previous/Next T Tools R Return 1. InSUMthe Media Play menu, press the ◄ or ► button to select Photos, then press the ENTERE button. 2. Press the buttons to select a photo in the file list. 3. Press the ENTERE button or ∆ (Play) button. ✎✎ NOTE xxWhile a photo list is displayed, press the ∆ (Play) / ENTERE button on the remote control to start a slide show. xxAll files in the file list section will be displayed in the slide show. xxDuring the slide show, files are displayed in order. xxDuring the slide show, you can adjust the slide show speed using (π) (REW) or (µ) (FF) button. xxYou can move to other files using ◄ or ► button. ✎✎ Media Play can play Music files automatically during a Slide Show if Background Music is set to On. ✎✎ You cannot change the Mode in Background Music until the Background Music file has finished loading. yySupported Photo Formats Image JPEG Photo Base-line Progressive Resolution 15360 x 8640 1024 x 768 Other Restrictions yyCMYK, YCCK Color space JPEG are not supported. Audio Language You can change the audio language if the video has more than one language. c Stop Slide Show / Start Slide You can start or stop a Slide Show. c Show Slide Show You can select the slide show Speed speed during the slide show. c Background Music You can set and select background music when watching a Slide Show. c Zoom You can zoom into images in full screen mode. c Rotate You can rotate images in full screen mode. c Information You can see detailed information about the played file. c c c All care protection (Depending on the country and model.) 1. All care protection will update Picture quality every 5,000 hours. 2. All care protection popup menu will show every 5,000 hours, Max 3 times (5,000/10,000/15,000 hours.) 3. The notification or popup menu will be closed by timeout (30 sec.) or selecting any key on the remote except power key. ✎✎ When user turns the power off and then on again, popup menu for requesting update is provided again. ✎✎ Popup menu is provided only 3 times including initial popup menu. ✎✎ Popup menu will show only at TV on time. Playing Multiple Files - 10 - There is no picture/video. RF (Cable/Antenna) Connection • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices). • Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the correct input source by pressing the SOURCE button on the remote control. • Reboot the connected device by unplugging and then reconnecting the device's power cable. The TV is not receiving all channels. No Caption on digital channels. • Make sure the coaxial cable is connected securely. • Run Auto Program to add available channels to the channel list. Go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC) • Verify the antenna is positioned correctly. • Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1. • Some channels may not have caption data. The picture is distorted: macroblock, error, small block, dots, pixelization. Others • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in sports and action movies. • A weak signal can cause picture distortion. This is not a TV problem. Purple/green rolling horizontal bars and • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the setbuzzing noise from the TV speakers with top-box has a grounding issue. Replace the Component video cables with an HDMI connection. Component cable connection. The picture will not display in full screen. The remote control does not work. The cable/set top box remote control does not turn the TV on or off, or adjust the volume. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the TV. • Adjust the picture size option on your external device or change the TV to full screen. • Replace the remote control's batteries. Make sure you insert them with the polarity (+/-) correct . • Clean the transmission window located on the top of the remote control. • Try pointing the remote directly at the TV from 5~6 feet away. • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the SAMSUNG TV code. A "Mode Not Supported" message appears. • Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution settings in this manual. Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component. • Caption must be activated on the external device. There is a plastic smell from the TV. TV Signal Strength is unavailable in the Self Diagnosis Test menu. TV is tilted to the right or left side. • This smell is normal and will dissipate in a few days. • This function is only available for digital channels received through an Antenna / RF/Coax connection. • Remove the stand base from the TV and reassemble it. The Channel menu is grey out (unavailable). • The Channel menu is only available when you select the TV source. Your settings are lost after 30 minutes or • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product's design and is not a defect. POP (TV's internal banner ad) appears on the screen. • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup). ✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ✎✎ You can watch detailed troubleshooting videos at www.samsung.com/spsn. ✎✎ Some functions and pictures shown in this manual are available on specific models only. ✎✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com → Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu. - 14- Settings Using the Setup Menu ■■DivX® Video On Demand: Shows the registration code authorized for the TV. If you connect to the DivX web site and register with the 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed. ✎✎ For more information on DivX® VOD, visit "http://vod.divx. com". ■■Information: Select to view information about the connected USB device. ❑❑ Using Sports Mode t This mode provides optimized conditions for watching soccer and other sports. yya (Zoom): Pauses playback and divides the picture into 9 parts. Select a part to zoom it in. ✎✎ When Sports Mode is On, the picture and sound modes are set to Stadium automatically. ✎✎ If you turn the TV off while Sports Mode is on, Sports Mode is turned off. Support Menu Self Diagnosis ■■Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen. ■■Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen. ■■Signal Strength: (Digital channels only) An HD channel's reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. ■■Reset: Reset all settings to the factory defaults. ✎✎ The PIN input screen appears before the setup screen. ✎✎ Enter your 4-digit PIN. Change the PIN using the Change PIN option. Software Upgrade Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device. Use Mode You can turn the TV into a display model for retail environments by setting Use Mode to Store Demo. ✎✎ For all other uses, select Home Use. ✎✎ With Store Demo, some functions are disabled, and the TV automatically resets itself after a preset amount of time. HD Connection Guide Refer to this information when connecting external devices to the TV. Other Information Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information about installing the wall mount, see the instructions provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own. Wall mount TV bracket C Wall Mount Kit Specifications (VESA) ✎✎ The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎✎ NOTE xxStandard dimensions for wall mount kits are shown in the table below. xxThe Samsung wall mount kit contains a detailed installation manual and all parts necessary for assembly are provided. xxDo not use screws that do not comply with the VESA standard screw specifications. xxDo not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set. xxFor wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. xxDo not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. xxSamsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. xxDo not mount the TV at more than a 15 degree tilt. xxAlways have two people mount the TV on a wall. Standard dimensions for wall mount kits are shown in the table below. If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the wall mount is shown in column C in the table below. Product Family TV size in inches VESA screw hole specs (A * B) in millimeters LED-TV 40 200 X 200 C (mm) 19 - 20 Standard Screw Quantity M8 4 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software. - 11 - To prevent the TV from falling ✎✎ Since the necessary brackets, screws, and string or cable are not supplied, please purchase these separately. 1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to the wall. ✎✎ We strongly recommend you drive the screws into a stud. 2. Insert the screws through the TV brackets, and then fasten the screws to the top VESA screw holes on the back of the TV. 3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or cable tightly to the brackets. ✎✎ Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer. ✎✎ Install the TV close to the wall so that it does not fall. ✎✎ Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV. Untie the string or cable before moving the TV. ✎✎ To purchase a TV Holder kit, contact Samsung customer care. Securing the TV to the Wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes as described in the next column. ✎✎ When you have to relocate or lift the TV for replacement or cleaning, be sure not to pull out the stand. Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. Refer to the manual provided with the Kensington Lock for additional information on proper use. ✎✎ Please find a "K" icon on the rear of the TV. The Kensington slot is beside the "K" icon. ✎✎ The position and color may differ depending on the model. Display Modes (HDMI/DVI Input) Optimal resolution: 1920 x 1080@60Hz Mode Resolution IBM MAC VESA DMT 640 x 350 720 x 400 640 x 480 832 x 624 1152 x 870 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 800 1280 x 1024 1280 x 1024 1366 x 768 1440 x 900 1600 x 900RB 1680 x 1050 1920 x 1080 Horizontal Frequency (KHz) 31.469 31.469 35.000 49.726 68.681 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 45.000 49.702 63.981 79.976 47.712 55.935 60.000 65.290 67.500 Vertical Frequency (Hz) 70.086 70.087 66.667 74.551 75.062 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 59.810 60.020 75.025 59.790 59.887 60.000 59.954 60.000 Pixel Clock Frequency (MHz) 25.175 28.322 30.240 57.284 100.000 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 74.250 83.500 108.000 135.000 85.500 106.500 108.000 146.250 148.500 Sync Polarity (H / V) 1920 x 1080 c c c c c c c c c c c c c c c c c c c c c c c c Troubleshooting If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG. Problem Flickering and Dimming Component Connections / Screen Color Screen Brightness Unwanted Powering off Possible Solution If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficiency features such as the Energy Saving feature. Follow the steps below with your remote to turn these features off or on. yy Energy saving : MENU → Setup → Eco Solution → Energy Saving → Select Settings yy Eco Sensor : MENU → Setup → Eco Solution → Eco Sensor ✎✎ This function may not be available, depending on the model. If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self Diagnosis Test on the TV to make sure there are no device issues. yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test yy If the test is ok, try making sure ; yy Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have used the AV Out jack on your video source. yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc. If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings you should check before calling for a repair. yy Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try adjusting these options. If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly No Signal Power Off feature. First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on knowing that it will turn off after a certain period of time and not waste energy. yy Sleep Timer : User Menu → Setup → Time → Sleep Timer If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature. yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off - 12 - Storage and Maintenance ✎✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV. ✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches. Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dampened with in a small amount of water. Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent. License This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+ Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source Announcement To send inquiries and requests for questions regarding open sources, contact Samsung via Email ([email protected]). Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name Display Resolution Screen Size (Diagonal) Sound (Output) 50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F (-20°C to 45°C ) 5% to 95%, non-condensing UN40K5100 1920 x 1080 40" Class (39.5 measured diagonally) 20 W Dimensions (W x H x D) Body With stand 35.5 x 21.9 x 3.1 inches (901.1 x 557.1 x 78.0 mm) 35.5 x 24.5 x 7.5 inches (901.1 x 621.5 x 191.4 mm) Weight Without Stand With Stand 17.9 lbs (8.1 kg) 18.1 lbs (8.2 kg) ✎✎ Design and specifications are subject to change without prior notice. ✎✎ This device is a Class B digital apparatus. ✎✎ For information about the power required and more about power consumption, refer to the label attached to the product. ✎✎ Typical power consumption is measured according to Energy Star Program requirements for televisions. ✎✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www. samsung.com/recyclingdirect or call, (877) 278-0799. ■■JACK PANEL DETAIL / REAR VIEW 1 2 3 (Unit: inches) Model name 1 2 3 UN40K5100 8.1 13.8 5.6 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2016 Samsung Electronics America, Incv - 15 - - 16 - 2016-07-14 오후 2:38:08