Samsung LN-R238WA Quick Guide (easy Manual) (ver.1.0) (English) - Page 12
Connections, Connecting VHF and UHF Antennas, Antennas with 300-ohm Flat Twin Leads
View all Samsung LN-R238WA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 2 CONNECTIONS Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see "Antennas with 300-ohm Flat Twin Leads" below. If your antenna has one lead that looks like this, see "Antennas with 75-ohm Round Leads" on page 8. If you have two antennas, see "Separate VHF and UHF Antennas" on page 8. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300-ohm twin flat leads, follow the directions below. 1 Place the wires from the twin leads under the screws on a 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adaptor into the ANT IN terminal on the back of the TV. English-7
English-
7
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on page 8.
If you have two antennas, see “Separate
VHF and UHF Antennas” on page 8.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on a 300-75
ohm adaptor
(not supplied).
Use a screwdriver to
tighten the screws.
2
Plug the adaptor into
the ANT IN terminal
on the back of the TV.
Chapter 2
C
ONNECTIONS