Samsung LN-S3296D Quick Guide (easy Manual) (ver.1.0) (English) - Page 10
Connecting Cable TV, Connecting to a Cable Box that Descrambles Some Channels, All Channels
View all Samsung LN-S3296D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box ANT 2 IN (CABLE) 1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels ANT IN ANT OUT 1. Find the cable that is connected to the ANT OUT terminal on your cable box. This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT". ANT 2 IN (CABLE) 2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.) ANT IN 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". 2. Connect this cable to a two-way splitter. Incoming cable Splitter Incoming cable Splitter Cable Box 3. Connect an RF cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box. Incoming cable Splitter Cable Box 4. Connect an RF cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. RF (A/B) Switch Incoming cable Splitter Cable Box 5. Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. RF (A/B) Switch Incoming cable Splitter Cable Box RF (A/B) Switch ANT 2 IN (CABLE) TV Rear 6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear of the TV. After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.) English-8