Home » Samsung Manuals » Flat Panel Televisions » Samsung LN-S5296D » Manual Viewer

Samsung LN-S5296D Quick Guide (easy Manual) (ver.1.0) (English) - Page 17

Operation, Plug & Play Feature - won t turn on

Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the button on the front of the panel. Plug & Play Feature When the TV is initially powered on, two basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control. The message "Shop Mode, Menu language, Channels and Time will be set." is displayed. Press the ENTER button, then "Select the Home Mode when installing this TV at home" menu is automatically displayed. 2 Press the or buttons to select "Shop" or "Home", then the ENTER button. Then "Select the language of the OSD" the menu is automatically displayed. We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side panel of the TV for five seconds to return to Dynamic (Home) mode. 3 Press the or button to select language, then the ENTER button. "Select the antennas to memorize" menu is automatically displayed. 4 Press the or button to memorize the channels of the selected connection. Press the ENTER button to select "Start". If the antenna is connected to ANT 1(AIR), select "Air" and if it is connected to ANT 2 (CABLE), select "Cable". If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select "Air + Cable". In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the or button, then press the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area. English-15 continued...

Section	Page
Contents	3
General Information	5
List of Features	5
Accessories	5
Viewing the Control Panel	6
Viewing the Connection Panel	7
Remote Control	9
Installing Batteries in the Remote Control	10
Connections	10
Connecting VHF and UHF Antennas	10
Connecting Cable TV	11
Connecting a VCR	12
Connecting an S-VHS VCR	12
Connecting a Camcorder	13
Connecting a DVD Player/Set-Top Box	13
Connecting a DVD Player/Set-Top Box via DVI	14
Connecting a DVD Player/Set-Top Box via HDMI	14
Connecting a Digital Audio System	15
Connecting an Amplifier/DVD Home Theater	15
Connecting CableCARD	16
Connecting a PC	16
Operation	17
Plug & Play Feature	17
Dynamic Menus and On-Screen Displays	19
Navigating Menus by Using the Menu Map	20
Selecting a Menu Language	21
Memorizing Channels	22
Changing Channels	24
Setting Up Your Remote Control	25
Remote Control Codes	27
Setting the Clock	30
Setting the On/Off Timer	32
Setting the Sleep Timer	33
Viewing an External Signal Source	34
Assigning Names to External Input Mode	35
Channel Control	36
Selecting Your Favorite Channels	36
Viewing the Channel Lists	37
Adding and Erasing Channels	38
Labeling the Channels	39
Fine Tuning Analog Channels	40
Checking the Digital-Signal Strength	41
LNA (Low Noise Amplifier)	41
Picture Control	42
Picture Control	42
Customizing the Picture Settings	43
Changing the Picture Size	45
Using the ColorWeakness Enhancement Feature	46
Digital Noise Reduction	47
DNIe (Digital Natural Image engine)	48
Setting the Film Mode	49
Viewing Picture-In-Picture	50
Changing the Size of the Sub (PIP) Picture	51
Changing the Location of the Sub (PIP) Picture	51
Selecting a Signal Source (Air or Cable) for PIP	52
Changing the Channel of the Sub (PIP) Picture	52
Freezing the Picture	53
Setting the Blue Screen Mode	53
Sound Control	54
Sound Control	54
Customizing the Sound	55
Setting the SRS TruSurround XT	56
Auto Volume	57
Choosing a Multi-Channel Sound (MTS) track	58
Choosing a Multi-Channel Sound (MTS) track	59
Selecting the Internal Mute	60
Selecting the Sound Select	61
Setting the On/Off Melody	62
Special Features	63
Setting the Function Help	63
Using the Energy Saving Feature	64
Menu Transparency Level	64
Using Game Mode	65
Using the V-Chip	66
How to Enable/Disable the Rating Controls	67
How to Set up Restrictions Using “TV Parental Guidelines”	68
How to Set up Restrictions Using “MPAA Rating”	69
Important Notes About Parental Locks	70
How to Set up Restrictions Using Canadian English	71
How to Set up Restrictions Using Canadian French	72
Using the V-Chip for Digital channels	73
Viewing Closed Captions (On-Screen Text Messages)	74
Viewing Closed Captions (On-Screen Text Messages)	75
Setting the Blue Eye	77
Using the CableCARD	78
Using the CableCARD Setup Function	78
Channel List Reorganization	79
WISELINK	80
Using the WISELINK Function	80
Using the WISELINK Menu	81
Using the PHOTO (JPEG) List	82
Using the MP3 List	89
Using the Setup Menu	91
Using D-Net	93
What’s D-Net?	93
When Connecting D-Net (IEEE1394) Compatible devices	94
Connection Options	95
4-Pin and 6-Pin Connectors	96
Selecting a D-Net device	97
The Direct Device-To-Device Option	98
The D-Net control panel	99
Control Panel Images for Each Device	101
Operating Tips	102
Recording Tips	104
Tips on stopping recording	105
File List	106
Troubleshooting (D-Net)	108
PC Display	112
Using Your TV as a Computer (PC) Display	112
Setting Up Your PC Software (Windows Only)	113
Display Modes	113
Adjusting the Picture Quality	114
Changing the Picture Position	115
Adjusting the Picture Quality and Position Automatically	116
Changing the Picture Size (PC Mode)	117
Viewing the Current Resolution	118
Initializing the Picture Settings	119
Appendix	120
Identifying Problems	120
Installing the Stand	121
Disconnecting the Stand	121
Stand Swivel Function	121
Installing the Wall Mount Kit (LN-S4096D)	122
Installing the Wall Mount Kit (LN-S4696D/LN-S5296D)	123
Using the Anti-Theft Kensington Lock	125
Specifications	125
Dimensions (LN-S4096D)	126
Dimensions (LN-S4696D)	127