Samsung LN26C350 Quick Guide (easy Manual) (ver.1.0) (English) - Page 2

Basic Functions Changing the Screen Size Changing the Picture Mode Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. To change the screen size, press the P.Size button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.Size button, you change the size of the picture on the screen. The following sizes are available: Your TV has three preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions. The Picture Modes are listed and described in the table below: Mode Dynamic Description Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room. Standard For a bright, detailed picture in a normally lit room. Movie For a studio quality cinema picture in a dimly lit or dark room. 16:9 Wide screen Zoom 1 Zoom 2 Wide Fit 4:3 Standard screen Screen Fit ✎✎ Screen Fit displays a full HD picture covering the entire screen with no cutoff on any side. It is only available when your TV inputs an HDMI (720p, 1080i, 1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal. To change the Picture Mode, follow these steps: 1. With the TV on, press the Tools button on your remote. The Tools menu appears. 2. Using the ▲ or ▼ on your remote, select Picture mode. 3. On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want. 4. Press the Exit button to exit the menu. Viewing the On Screen Menus To view the On Screen Menus, follow these steps: 1. With the power on, press the Menu button on your remote. The main menu appears. The menu's left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application, and Support. MEDIA.P Menu 2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the EnterE button. 3. When done using the menu, press the Exit button on your remote to exit. Remote Control Buttons and Functions: A B C D Turns the TV on and off. Press number buttons for direct access to channels. Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV. Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3, press 54, press -, and then press 3. Adjust the volume. Displays the channel list on the screen. View the Media Play. Quickly selects frequently used functions. Use these buttons to select On Screen Menu items and change menu settings. Return to the previous menu. Colored buttons for use in the Channel List, Media Play menu, etc. MEDIA.P A B C D Return to the previous channel. Cut off the sound temporarily. Change channels. Display the main on-screen menu. Displays Favorite Channel Lists on the screen. Press to display information on the TV screen. Exit the menu. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). P.SIZE: Picture size selection. CC: Controls the caption decoder. Selecting a Source Connecting a USB Device for Media Play To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/ DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the Source button on your remote. Each time you press the Source button, you change to a different source. Changing Channels and Adjusting the Volume You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps: 1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie files to the USB jack on the rear of the TV. 3. When the Application selection screen appears, press the EnterE button on your remote to select Media Play (USB). TV Rear Panel USB Drive L Move E Enter R Return Volume Channel Adjust the voluMmEDIAe.P by pressing the y button on the remote. MEDIA.P ChaMnEDgIAe.P the channels by pressing the z button on the remote. ✎✎ If your TV is attached to a cable or satellite box, change the channel using the box's remote. You can also change the channels by pressing the z buttonsA on B C D the front panel of your TV and adjust the volume by pressing the y buttons. A B C D Power Indicator A B C D Remote control sensor Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Turn on your TV. 2. Using your remote, press the Menu button on your remote. Then, select Setup → Time. 3. Select Clock Mode, and then press the EnterE button. Set Clock Mode to Auto or Manual. ✎✎ Select Auto if you have a digital channel in your area and are not using a cable/sat box. Month -- Hour -- Clock Set Day -- Minute -- Year ---- am/pm -- L Move U Adjust E Enter R Return 4. Select Clock Set, and then press the EnterE button. The Clock Set screen appears. 5. Using the number buttons on your remote, enter the month, day, year, hour, and minute. Use the ◄ or ► button to move between entry fields. 6. Press the Return button on your remote when done. English - 2 BN68-02621A-04