Samsung LN26C450E1D Quick Guide (easy Manual) (ver.1.0) (English) - Page 2

Remote Control Buttons and Functions: Changing Channels and Adjusting the Volume ✎✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons. Turns the TV on and off. Press number buttons for direct access to channels. Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3, press 54, press -, and then press 3. Adjusts the volume. Displays the channel list on the screen. View the Media Play. Quickly selects frequently used functions. Use these buttons to select On Screen Menu items and change menu settings. Return to the previous menu. Colored buttons for use in the Channel List, Media Play menu, etc. Use these buttons in the Media Play and Anynet+ modes. ( : controls recording on Samsung recorders with the Anynet+ feature) MEDIA.P A B C D S.MODE SLEEP MTS P.MODE P.SIZE CC Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV. Return to the previous channel. Cut off the sound temporarily. Change channels. Displays the main on-screen menu. Displays Favorite Channel Lists on the screen. Press to display information on the TV screen. Exit the menu. S.MODE: Selects the sound mode. SLEEP: Setting the Sleep Timer. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). P.MODE: Selects picture mode. P.SIZE: Choose the picture size. CC: Controls the caption decoder. Changing the Picture Mode Selecting a Source Volume Channel MEDIA.P Adjust the volume by pressing the y button on the remote. MEDIA.P Change the channels by pressing the z button on the remote. ✎✎ If your TV is attached to a cable or satellite box, you change the channel using the box's remote. You can also change the channels by pressAing thBe C D z buttonSs.MOoDEn SLEEP MTS the front panel of your TV and adjust the volPu.MOmDEe byP.SIZE CC pressing the y buttons. A B C D RemoteS.McOoDnEtrol sSLeEnEPsor MTS Power Indicator P.MODE P.SIZE CC Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Turn on your TV. 2. Using your remote, press the Menu button on your remote. Then, select Setup → Time. 3. Select Clock Mode, and then press the EnterE button. Set Clock Mode to Manual. ✎✎ Select Auto if you have a digital channel in your area and are not using a cable/sat box. Clock Set Month Day Year -- -- ---- Hour Minute am/pm -- -- -- L Move U Adjust E Enter R Return 4. Select Clock Set, and then press the EnterE button. The Clock Set screen appears. 5. Using the number buttons on your remote, enter the month, day, year, hour, and minute. Use the ◄ or ► button to move between entry fields. 6. Press the Return button on your remote when done. Your TV has three preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions. The Picture Modes are listed and described in the table below: Mode Dynamic Standard Movie Description Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room. For a bright, detailed picture in a normally lit room. For a studio quality cinema picture in a dimly lit or dark room. To change the Picture Mode, follow these steps: 1. Turn on your TV. 2. Using your remote, press the Menu button on your remote. Then, select Picture → Mode. 3. On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want. 4. Press the Exit button to exit the menu. To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the Source button on your remote. Each time you press the Source button, you change to a different source. Viewing the On Screen Menus To view the On Screen Menus, follow these steps: 1. With the power on, press the Menu button on your remote. The main menu appears. The menu's left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application, and Support. MEDIA.P Menu 2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the EnterEMEbDIuA.tPton. 3. When done using the menu, press the Exit button on your remote to exit. Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps: 1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV. 3. When the Application selection screen appears, press the EnterE button on your remote to select Media Play (USB). MediaPlay Videos SUM A Change Device TV Side Panel USB Drive D View Devices E Enter R Return A B C D S.MODE SLEEP MTS P.MODE P.SIZE CC A B C S.MODE SLEEP D English - 2 MTS BN68-02664A-03