Samsung LN26D450G1D User Manual (user Manual) (ver.1.0) (English) - Page 166
The TV sound
UPC - 036725234772
View all Samsung LN26D450G1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Problem The connected device is not displayed. ◀ The TV sound is not output through the receiver. Possible Solution ●● Check whether or not the device supports Anynet+ functions. ●● Check whether or not the HDMI cable is properly connected. ●● Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. ●● Search Anynet+ devices again. ●● You can connect an Anynet+ device using an HDMI cable only. Some HDMI cables may not support Anynet+ functions. ▶ ●● If Anynet+ is terminated because there has been a power failure or the HDMI cable has been disconnected, please repeat the device scan. ●● Connect the optical cable between TV and the receiver. English
◀
▶
English
Problem
Possible Solution
The connected
device is not
displayed.
●
Check whether or not the device supports Anynet+ functions.
●
Check whether or not the HDMI cable is properly connected.
●
Check whether
Anynet+ (HDMI-CEC)
is set to
On
in the
System
menu.
●
Search Anynet+ devices again.
●
You can connect an Anynet+ device using an HDMI cable only.
Some HDMI cables may not support Anynet+ functions.
●
If Anynet+ is terminated because there has been a power failure
or the HDMI cable has been disconnected, please repeat the
device scan.
The TV sound
is not output
through the
receiver.
●
Connect the optical cable between TV and the receiver.