Samsung LN32A450C1D User Manual (user Manual) (ver.1.0) (English, French) - Page 66
Setting Up Anynet+, Scanning and Switching between Anynet+ Devices
View all Samsung LN32A450C1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Setting Up Anynet+ The following settings help set the Anynet+ functions. To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1. Press the TOOLS button. Press the ENTER button to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER button. Air 28 Recevier: On Connect Recorder Setup 3, Press the ▲ or ▼ button to select "On", then press the ENTER button. The "Anynet+ (HDMI-CEC)" function is enabled. If you select "Off", "Anynet+ (HDMI-CEC)" is disabled. W hen the "Anynet+ (HDMI-CEC)" function is disabled, all the Anynet+ related operations are deactivated. Move Enter Return Anynet+ Setup Anynet+ (HDMI-CEC) Auto Turn Off Searching Connections : OffOff : OffOn Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off 2. Press the ▲ or ▼ button to select "Auto Turn Off", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Yes", then press the ENTER button. The "Auto Turn Off" function is enabled. If you select "No", the "Auto Turn Off" function is canceled. Move Enter Anynet+ Setup Anynet+ (HDMI-CEC) : On Auto Turn Off Searching Connections : OffNo Yes Return Press the EXIT button to exit. Move Enter Return The active source on the TV remote must be set to TV to use the Anynet+ function. If you set "Auto Turn Off" to "On", connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off. Scanning and Switching between Anynet+ Devices 1. Press the TOOLS button. Press the ENTER button to select "Anynet+(HDMI-CEC)". Anynet+ devices connected to the TV are listed. 2. Press the ▲ or ▼ button to select to a particular device and press the ENTER button. It is switched to the selected device. Air 28 Recevier: On Connect Recorder Setup 3. If you cannot find a device you want, press the ▲ or ▼ button to select "Searching Connections", then press the ENTER button. The meassage "Configuring Anynet+ connection..." is displayed. When searching devices completes, the connected devices are listed in the Anynet+ menu. Move Enter Return Anynet+ Setup Anynet+ (HDMI-CEC) : On ► Switching to the selected devices may take up to 2 minutes. You cannot cancel the Auto Turn Off : Yes ► operation during the switching operation. Searching Connections ► The time required to scan for devices is determined by the number of connected devices. Move Enter Return When the device scan is complete, the number of devices found are not displayed. Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices. If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button. English - 64