Samsung LN32A620A1F User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 114

Auto Wall-Mount Adjustment (Sold separately) Once the auto wall mount is installed, your TV's position can be easily adjusted. ➣ This function is optional and may not be supported. TV Rear Panel Auto Wall-Mount EX-LINK Cable (Not supplied) Setup V-Chip Caption External Settings ► .QEZntertainmeAnBt C Energy Saving PIP GCHaIbleCARDJ™KL CableCARD Setup PSRoSftware UpTgUraVde : DOEffF : Off MNO WXY Entering the menu 1. Press the or ► button on your remote control. ➣ The Wall Mount Adjustment screen is displayed. ➣ If the Wall Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen. • Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. • Press the ▲ or ▼ button to select "External Settings", then press the ENTER button. • Press the ▲ or ▼ button to select "Wall-Mount Adjustment", then press the ENTER button. Remembering the Position 2. Adjust to the desired position using the buttons. ➣ If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears. ➣ Press the INFO button to reset. Press the ◄ or ► button to select "Yes", then press the ENTER button. The position is initialized to the default setting. 3. Press the Blue button. Press the ▲ and ▼ buttons to select a save mode from either Position 1, Position 2 or Position 3 in order to save the current position. ➣ To not save the current position, press the RETURN button. ➣ When selecting a save mode, you cannot use the Color buttons. 4. Press the ENTER button to save. ➣ When Position1 is selected, the message "Current position saved as Position1" is displayed. 5. Press the ENTER button. ➣ The saved Position appears on the left side of the OSD. Moving to the remembered position 1. Complete Step 1 of "Entering the menu". 2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position. ➣ You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons. ➣ If you adjust the Position after moving to a pre-set position, the position display will disappear. ENG/NUM/SYM LAST External Settings Melody : Medium Wall-Mount Adjustment Move Enter Wall-Mount Adjusment Return Position Adjust 1 Save 2 3 INFO Center DATA-SERVICE ON-DEMAND GUSIDaEve PAGE PREV. PSAeGlEect a mode to NSEaXvTeP.AGE Position1 PSoPsAiCtEion2 DEL Position3 Move Enter Return Wall-Mount Adjusment Position1 Position Adjust 1 Save 2 3 INFO Center ➣ For installation, refer to the Installation Manual provided with the wall mount. ➣ For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. ➣ This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. ➣ The auto wall mount will not work when Anynet+ or WISELINK is operating. ➣ LN40A620A1F models are not compatible with the older wall mount model (WMN5090A). ➣ The Auto Wall-Mount and RJP (Remote Jack Pack) will not work at the same time. ➣ When the Auto Wall-Mount is connected to EX-LINK, the AV Control and the Clone Remote Control do not work. ➣ When the Auto Wall-Mount is not connected to EX-LINK, the AV Control and the Clone Remote Control work through the RJP JACK. ➣ When the Auto Wall-Mount is not connected to EX-LINK and the RJP is connected to the RJP JACK, the AV Control and the Clone Remote Control do not work. English - 112