Samsung LN32A650A1F User Manual (ENGLISH) - Page 84
Network Settings and InfoLink, Network Connection (DHCP) and Automatic Setup
View all Samsung LN32A650A1F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Network Settings and InfoLink Network Connection (DHCP) and Automatic Setup The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually. LAN Connection for a DHCP Environment The LAN Port on the Wall External Modem (ADSL/VDSL/Cable TV) LAN 1 Cable 2 Modem Cable TV Rear Panel 1. Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable. 2. Connect the LAN port on the wall and the external modem with a modem cable. You can connect the LAN via a Sharer (Router). IP Sharer TV Rear Panel The Modem Port on the Wall LAN Cable External Modem (ADSL/VDSL/Cable TV) Modem Cable You can connect the LAN port and the TV directly depending on your network status. The LAN Port on the Wall TV Rear Panel LAN Cable ➣ The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. ➣ If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again. ➣ For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the corresponding product. ➣ You can connect the TV to the LAN directly without connecting it through a Sharer (Router) ➣ You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-connection-type ADSL modem. BN68-01429C-Eng.indb 82 English - 82 2008-02-26 ¿ÀÈÄ 5:14:38